We are working on a office interior design project. LEED CI IEQp1 says the requirement is "Meet the minimum requirements of Section 4 through 7 of ASHRAE Standard 62.1-2007, Ventilation for...

I am new to the ASHRAE MZ62 calculator and I am not clear on how to write the narrative regarding :
Ds - If not all zones are entered, provide a description of how the system Ds value was...

In the reference book, under IEQc1 point 4. Implementation, it states that "This prerequisite is not limited to the project scope of work." Could someone please clarify exactly what this is...

I am working on LEED CI 2009 Retail Shop. This shop is using existing wall, roof and floors and existing AC units in a shopping mall. In this shop there is window provision and surrounded by...

I have a 3 story non-residential building, and...

Office floor of a high rise building trying to obtain LEED sliver. Floor is served by...

All HVAC mechanical systems were existing. Only the ductwork was installed. There is Engineer for this project is there a way to comply without the signature?

Hi all,

We have a small LEED:CI project in a CS certified shopping mall. We don't have any direct outdoor air intakes, we take the air from the main atrium and give it to our space. The...

We have a CI project with multiple zone units and...

We received a comment back on a CI project stating:

"Demonstrate the system serving the special occupancy space is capable of modulating system and zone minimum supply volume below 0.30...