Forum quick links
Performance Period for MRc3 versus EAc1
EBOM-2009 MRc3:Sustainable Purchasing—Facility Alterations and Additionsposted by Karin Wohlert on
We are adding an addition to an existing facility. Ideally the performance period for energy would start after construction is complete.
Surface finish on Concrete Yards slab pursuing SSc7.1
NC-2009 SSc7.1:Heat Island Effect—Non-Roofposted by Sean Hogan on
Hi, Smoother finish looks better than brushed finish on concrete, Are there any SRI issues to consider in deciding on the final texture, or is that all a function of the (initial) concrete colour
Question about sizing the silt trap
NC-2009 SSc6.1:Stormwater Design—Quantity Controlposted by Magda Aghababyan on
Hi, We are trying to pursue both storm water quality control and quantity control credits.
How do you simplify the VOC budget method for one non compliant
CI-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealantsposted by cathy keagle on
I read the following. However, how do you do this in the template? Will it accept only putting in the amounts for the one product and the offset?
Addition to an existing production hall
NC-2009 MPR2:Must be a complete, permanent building or spaceposted by Adam Targowski on
My client is an owner of an existing production hall. He will build a big addition on the left wing of the existing building which will also be a production hall.
Flush Out Challenges
NC-2009 IEQc3.2:Construction IAQ Management Plan—Before Occupancyposted by Jamie Abernethy on
We had enough time (14days) built into the schedule to do a pre-occupancy flushout.
v2.2 project with v3 ID credit
EBOM-2009 MRc4:Sustainable Purchasing—Reduced Mercury in Lampsposted by Saju Varghese on
Can a v2.2 project get this credit even if its a v2009 credit?
Manufacturing Location for Casework
CI-2009 MRc5:Regional Materialsposted by Kevin Dunham on
How do I determine whether custom casework installed on a project meets the 500-mile radius requirement?
Credit Compliance with Un-determined Future Fit-out Space
NC-2009 WEp1:Water Use Reduction—20% Reductionposted by Catherine Blakemore on
My project only has scrubs sink, which are exempt from LEED water use reduction requirements. The other portion of my project is undetermined, future fit-out space.
Multiple thermostats averaging
NC-2009 IEQc6.2:Controllability of Systems—Thermal Comfortposted by Stantec BG+LU FW on
If one VAV box with a reheat coil is serving three private offices, would providing one thermostat for each office, and have the controls average the temperature requirement for each thermostat, an