Hi,

For the prerequisite requirement to add R-19 insulation to floor / slab under energystar, is it required on every floor?
Knowing that all floors are airconditioned,

The...

Hello everybody,

We are working on a project under LEED V4 certification.

ABOUT PREREQUISITE “MINIMUM ENERGY PERFORMANCE” , we must comply with the ASHRAE mandatory provisions and...

Hello,

The project we are working on is a shopping mall aiming to be LEED V4.1 (...

Hi everybody, 

How do you set the reverberation time values ​​for "Performing Arts Space"? On table 2 of the LEED V4 guide page 758, nothing is written except "Vary by application". So...

Hello - how do i calculate the baseline parking capacity of an airport ? - it is not included in the TABLE 1 - Base Ratios for parking spaces, by building type.

Does the monitoring of SWPP and PCES have to be carried out every week on LEED certification projects even if in the absence of rainy / weather events (No precipitation / no rain)

Hello all,

I am currently working on the certification of 2 separated buildings with different usages (separated HVAC and plumbing systems), both are following the v4 BD+C NC. The issue is...

f the only subsystem available in the project is (Indoor plumbing fixtures and fittings), Are we eligible to earn this Credit for a core and shell project?

Source for Table 1 Maximum Parameters

Hi,

I'm a beginner with the LEED v4 and the calculator for the EAc2 credit. I'm asked about the interest of the calculator. We put the simulation results in it so what is it used...