I have a material submittal for three component multi purpose fluid epoxy resin grout , that is used for concrete column repairing and strengthening 

under which category should this be...

We are planning on using an ascent macerating toilet. I was wondering how to properly specify it  in the Water Use calculator. Would this fixture be allowable?

Hi

I am wondering if I am alone in this.. On each LEED Project, I waste a lot of time to enter data in the Excel Performance Calculator. In a lot of cells, after entering the data, I am...

Hi - has anyone targeted this credit for a CLT building? Given that the timber used is...

We have a project where we have irrigation, restaurant tenants, indoor fixtures and service sinks. The 1st 2 are easily metered, but it is not easy to separate the indoor fixtures and service...

Hi,

Do tankless Electrical water heaters have to comply with any efficiency requirements, in order to comply with the 7.4 mandatory provisions? On table 7.8 the performance requirements...

Hi all,

Emission-minimiert-loesemitterfrei for a paint product is valid for the credit EQc2 - Low Emitting Materials?

Thanks in advice

Hi all,

We are currently working on a project which is a building with two levels - Ground floor level and Level 01. Level 01 is 1,000 m2 and consists of hotel rooms, whereas Ground floor...

Hello everyone!

I would like to ask if anyone has some experience or can advise me regarding the fresh air requirements in case of an Automated Warehouse with no occupancy. My project is...

Hi,

Our team has a question about LEED-ND: Walkable requirement in section M (Building height to street ratio), the requirement is to comply with the 40% of the block...