Hi Everyone, 

We are modeling A Data center and the internal walls forvault spaces have insulation in them because of high temperature in the data center vault spaces, Now I am...

some post in this forum where the additional power has been defined as process load. For example:  https://leeduser.buildinggreen.com/forum/additional-interior-lighting-power-1 We use this assumption...

Dear Srs, we are using the DCV strategy in one building. The doubt are when we need to ventilated or not...

A room have a schedule of 8am to 18:00

• Beetween this hours the room...

Our project is located in an ND Gold certified neighborhood.  If we pursue the LEED for ND location credit in leiu of other L&T credits, how can we receive a Regional Priority point for...

In the case of drying materials and to help run some tests for the commissioning processes to make sure building equipment is functioning properly, can you turn on RTUs prior to building...

Our project is in Seattle with stringent Stormwater requirements. The Civil Engineer used software that they’re required to use to size BMPs, but it does not provide the info in the calculator...

ASHRAE 62.1, Section A1.2.2 states:

Er is less than 1.0 for plenum return systems with secondary recirculation (e.g. fan-powered...

Hello to all LEED Users,

Ιn our project the Building (nonresidential – 8.000 m2)  consists of following levels:

• Ground Floor
• 1^st Floor
• 2...

will be that I went to school for a long time to learn how to do this, and it isn't something you're going to learn in a forum post. You can try to follow along with that Direct Determination Method,...

Hi All, I have read som many answers regarding  the baseline system for Data centers, Some are saying use system 8 some are saying use system 3 and 4, which one is the right system? I am working...