| Topic | Recent |
|---|---|
Exemplary performance limits for on-site renewablesSchools-2009 IDc1: Innovation in Designposted by Keelan Kaiser on Jan 18, 2011, 1:34 pm
In 2007 Schools, can we apply for two ID points if we get our on-site renewable production up to 22.5% (12.5% + 5% + 5%)? 25.5%? This seems like a possibility if I read correctly the limit of up... Last reply: Tristan Roberts, Jan 20, 2011, 5:32 pm |
|
Option 1- Can All Three(3) Spaces be ClassroomsSchools-2009 SSc10: Joint Use of Facilitiesposted by James Keohane on Jan 16, 2011, 2:21 pm
The credit language for Option 1 states in part that...... "at least three(3) of the following spaces included in the school are accessible to and avilable for shared use by the general public:... Last reply: Tristan Roberts, Jan 20, 2011, 5:12 pm |
|
Number of StudentsGeneral forumsposted by Maura Adams on Jan 12, 2011, 1:06 pm
I'm working on a boarding school classroom building. We have 535 students, but they'll spend a maximum of 2 hours/day in the building. The form seems to assume a traditional school building,... Last reply: Tristan Roberts, Jan 20, 2011, 4:58 pm |
|
LEED NC or LEED Homes?LEED Rating System Selectionposted by Rob Hink on Jan 13, 2011, 12:42 pm
We are designing a building to serve as the Deans Residence for a large University. While serving as the deans home it also will be designed for receptions and meetings. Its is a 2 story... Last reply: Tristan Roberts, Jan 20, 2011, 4:40 pm |
|
Draft formsGeneral forumsposted by Susan Walter on Jan 20, 2011, 3:18 pm
So far, these forms are still generic and the changes I do see in them I am anticipating seeing in the newer versions of LEED. The balloted version of LEED HC is more helpful to me in... |
|
blow-out fixturesEBOM-2009 WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by Pablo Fortunato Suarez on Jul 20, 2010, 6:47 amthe exception above. If this were my project, and #1 was prohibitively expensive or problematic, I would certainly recommend #3. Hope that helps a little, Dan ps I would welcome input from other forum users... Last reply: Pablo Fortunato Suarez, Jan 20, 2011, 1:25 pm |
|
Feed-in-tariffs and energy modeling in EAp2 and EAc1Schools-2009 EAc1: Optimize Energy Performanceposted by Ward Miller on Jan 20, 2011, 5:10 am
In LEED, energy savings are calculated in monetary amounts rather than energy units. I'm working on a project in Europe where feed-in-tariffs are the official energy rate for energy produced from... Last reply: Marcus Sheffer, Jan 20, 2011, 9:24 am |
|
More than 1 application for Innovation?NC-2009 IDc1: Innovation in Designposted by Clare Parry on Jan 19, 2011, 7:55 pm
We have a significant office project (NC-2009), which is highly innovative and is carbon neutral, effectively disconnected from the water grid and contains a number of innovations, both world-... Last reply: Clare Parry, Jan 20, 2011, 12:35 am |
|
MR Materials Credits (recycled/reuse/regional/biobased)General forumsposted by Tom Lent on Jan 10, 2011, 8:39 pm
This comment applies to issues across several of the MR Materials Credits (... Last reply: Laura S. D'Ardenne, Jan 19, 2011, 8:01 pm |
|
For those who need VerificationPilot-Credits PC27: Reconcile Designed and Actual Energy Performanceposted by Marcus Sheffer on Dec 12, 2010, 3:21 pm
Beyond just measuring consumption. This credit explores the verification process for determining if the predicted savings during design and construction actually happened once the facility is... Last reply: Marc Mondor, Jan 19, 2011, 5:14 pm |
