Dear LEEDers,
Can someone confirm that a rainfall of 1 inch per 24 hours is 1 inch per 1 inch squared of ground surface?
Thank-you,
Ian

Do the requirements about sound transmission have to be applied for moveable partitions in open-plan office?
Achieving the...

Hi,
There's several quality level for interior air in EN 15251 : category I to III. The reference guide doesn't enjoin a specific category, as you can see in this extract :
"To...

Dear Leed user team,

This question concerns the exhaust rate for toilets of an new office building.

It's an office building of 35 000 square feet, registered in Leed v4...

Hi,
We have several interior spaces where insulation is between two concrete slabs.
Do you think we really have to consider this insulation, because it won't be in contact with...

For Core&Shell projects, the reference guide specifies : “Assume that the entire floor plate, except for the core, will be regularly occupied space “.
However, for high-rise office...

Dear All,
The Global compliance Path guide book gives the option between ASHRAE 62.1-2007 or European standards EN 15251: 2007 and EN 13779: 2007.

Question :
Can we use the...

There are secral tools that can be used for LCA but it appears that some tools are more detailed than others. In europe the calculation methods seems to go into great detail. I think its great...

Dear all,

A short feedback about our experience concerning EQ PC 57 use, for an office tower project in France (Marseille) under LEED CS V3.
For this project, LEED CS V3 and French "...

Michelle Halle Stern Senior Sustainability Consultant Greenwood Consulting Group LEEDuser Premium Member 120 thumbs up September 16, 2015- 1:47 pm More than enough photos if that show the requested information. There are a number of posts on the subject in this forum if you search "photo" From the form: Option 1 Upload. Photographs documenting construction and pre-occupancy phase moisture protection methods, for absorptive materials, have been provided. Upload IEQc3.1-2. Provide photos documenting methods employed to protect absorptive materials from moisture damage during construction...