Dear all,

we are currently working on a research laboratory, which contains normal daylighted office spaces and enclosed laboratory spaces. The occupants will switch between their desk and...

Hi, 

When asked to taking into account daylight saving time to perform...

Hi,

we need to test compliance of an office building with the LEED v4 Daylight criteria (NC-v4 EQc7), following Option 1 (...

Hi,

I'm working on a project with administration affectation and some commercial surfaces on the groundfloor (surface < 40% of the total project surfaces).

As the commercials...

Dear All,

we are currently working on the LEED certification of a new winery that will be built in Portugal. The main wine production zone inside the building consists of a large...

Hi all,
We have a High School project where the auditorium will mainly be used for performances and rehearsal. We have a black-box theater / drama classroom too. I assume this will be...

Illuminance simulations should be perform for all the regularly occupied spaces. What if I have 20-storeys building with same geometry and same layout? Simulating each floor seems pointless,...

Hi there!

we are about to undertake the daylight simulation for a 50.000m² building. The way we understand the credit language, the whole building is to be simulated, except non regularly...

Hello,

I am modeling a plant that has regularly occupied spaces classified as work spaces. These spaces have little to no windows which hurts overall...

For daylight credit, do the frits suffice as sun shading? 

Or would these rooms of the building not qualify for the daylight credit or just be hindered during a simulation?