Hi! This job board is a new feature we're trying out here at LEEDuser. If you're hiring—and we know many of you are looking for help—please feel free to start a new post to let people know about...

On our site, seawater has been used for flushing instead of potable water, does it count as water-saving under LEED CI?

Or, only the savings from the water-efficient fixtures are counted...

For the CDPH Standard Method v1.2-2017 evaluation In V4 you had to specify the TVOC ranges: 0.5 mg/m3 or less, between 0.5 and 5 mg/m3, or 5 mg/m3 or more. In V4.1 it says, "The statement of...

Hello to all Users,

I have following question:

The run off Volume calculation method : V=P*Rv*A/12 as given in the reference guide does it refer to Run off volume per month...

In looking at the new 4.1, where can I look to determine if a products meets either the Action plan, the Advanced screening & assessment, or the Full assessment?

Additionally, if the...

Hello,

We are working on a residential project with a central laundry room with a 2200 cfm exhaust rate (each dryer has a dedicated exhaust fan). Per ASHRAE 62.1-2010, this space requires...

We are in a factory project and the cooling tower is used for the process water for the factory equipment. So, Does the cooling tower credit requirement applies to our project ?

I'm working on a healthcare project where the client is planning on using just the no smoking symbol on the door with no words or 'language' attached.  Just the cigarette crossed out - Is this...

We have a LEED v4.1 Core & Shell project with no Landscaping in the scope of work. The existing landscaping is anticipated to remain with...

Dear LEED users, 

I'm working in a project targeting LEED silvder under LEED v4 BD+C:NC. In our project, in addtion to the main buillding (LEED targeted), we have anogher supporting...