Hi Everyone,

For a project connected with DCP, is it sufficient to meter the chilled water coming into the project using a single BTU meter for the 'Space Cooling' end use? What if the...

We are working on a new building on a college campus for which the District purchases...

On page 591 of the ref guide, it states...

I know that Sherman Williams provides a list of products that can be used for this credit. I am wondering if anyone has found other manufacturers that provide detailed information about there...

So it is already clear cut that a LEED AP in BD+C can pursue this credit for a LEED ID+C project under LEEDv4.1.  But I've been reading the final draft of the LEED v5 guide book for ID+C, and it...

I have a very large project that will not start construction until 2022 or 2023 and it will be under construction for several years. I therefore want to be careful about sunset...

I have been advised that the TSI Dust-Trak DRX can now be used for the particulate measurements.

Has anyone used this successfully (gained certification)?

Is it acceptable to use...

Hi All,

       We are going through a factory project having 3 major workshop buildings. There is no provision for space cooling by direct expansion or chilled water like cooling system....

Dear All, 

I am executing a residential project pursuing LEED O&M v4: Multifamily, where we need to conduct the location and transportation survey, as well as the occupant comfort...

Hello,
Under EAc1 my understanding is that the energy model will use a baseline assumption for plug loads. Would it be possible to introduce a plug load energy reduction program as an ID...