Hello,

Are materials used in loading bays required to be submitted under the low-emitting materials credit?

For our project, the loading bay is accessed through a garage door and is...

Hello,

I am performing an energy modelling for a C&S building.
When filling in the exterior lighting data in the "Lighting" tab, Tradable Surfaces, it seems that the values ​​...

Hi,

We are performing energy modelling for an airport. We have the Heat Load Summary Sheet where the Minimum Outdoor Air Requirement is taken with 30% excess to ASHRAE 62.1...

Hello,

We are proposing a green wall for our project, which will require irrigation and must adhere to the guidelines outlined in Option 2 of this credit. However, we were unable to locate...

I'm working on a project that is an expansion of an existing building, primarily adding a few levels on top. The cooling and heating energy of the expansion exceeds 10% of total energy use so...

There is an adhesive that the manufacturer claims is 0 g/L of...

Hi, 
 

I am working on a LEED ID+C V4project , we dont have existing construction details for the building and the building was constructed in 1970, What should i assume for building...

Does anyone have a view of what would qualify to meet some of the subjective requirements in the Extreme Heat design measures? Statements like "High levels of insulation" and "lower Solar Heat...

Our firm pursued this credit for a project site in Baltimore, MD. I found that the prerequisite and Option 1 overlap a great deal, especially when they are presented in the same worksheet. In the...

We have some uses that are not included in the indoor water use reduction, such as water for cleaning and cooking. Did anyone try to include those usages in the calculation? Should they be...