Log in
Forum
Topic

Catch-22?

EBOM-2009 IEQc2.1: Occupant comfort - occupant survey
posted by Rob Watson on Nov 30, 2010, 5:28 pm

We are working on TAIPEI 101--2 million SF and over 100 tenants--as an...

Last reply: Dan Ackerstein, Dec 8, 2010, 2:52 pm

Help test the Pilot credits!

Pilot-Credits PC36: Compartmentalization
posted by Maureen Mahle on Dec 8, 2010, 2:36 pm

Hi LEEDusers -

Pilot credits are a way for USGBC to gather information on what works and what doesn't, based on real LEED projects. Help improve the rating system - and the buildings we...

AGMBC on existing campus

LEED Guidance for Campuses and Multiple Buildings
posted by Clint Newton on Dec 8, 2010, 1:00 pm

I would like to offer this criticism: The guide does not adequately explain the documentation process. When you register a Block Project only the credits associated with the Master Project appear...

Residential clubhouse with showers

NC-2009 WEp1: Water Use Reduction
posted by Wei Jiang on Dec 1, 2010, 5:11 am

We are applying LEED-NC for a residential clubhouse, which includes swimming pools, sports facilities, gym room etc. Showers are provided for users for cleaning after sports.

In water use...

Last reply: Tristan Roberts, Dec 8, 2010, 12:06 pm

BUilding area to site area ratio

General forums
posted by Tarek Dalati on Nov 6, 2010, 2:51 am

i m working on cerifiying a residential tower ground+52 ,floor area is 22982 sqft and the site area is 56282 sqft.
the total building square footage is 892048 sqft.
as i know the...

Last reply: Tristan Roberts, Dec 8, 2010, 11:55 am

How to model an Air to water heat pump inverter in equest.

NC-2009 EAp2: Minimum Energy Performance
posted by Santiago Guerci on Nov 17, 2010, 9:02 am

I would appreciate if someone could help me into modeling this equipment with equest software.
I don`t know wich kind of system i have to use.

For the baseline it is system 7...

Last reply: Marcus Sheffer, Dec 8, 2010, 11:50 am

Insulation R values for cold climate

NC-2009 EAp2: Minimum Energy Performance
posted by Margaret Montgomery on Dec 1, 2010, 5:34 pm

We have an interesting question posed by a project team member. The project is in Alaska, where the temperature is more often 0 F than 75 F (with about 13000 HDD). The insulation material being...

Last reply: Marcus Sheffer, Dec 8, 2010, 11:43 am

Use of concave integral blinds to reduce glare &help daylighting

NC-2009 IEQc8.2: Daylight and views - views
posted by Renee Shirey on Dec 7, 2010, 6:15 pm

I know that the configuration of integral blinds does not count for either IEQ8.1 or 8.2, I just wondered if anyone has had any experience in installing the venetian blinds with the concave side...

Last reply: Allison Beer McKenzie, Dec 8, 2010, 11:39 am

Infiltration Rates

NC-2009 EAp2: Minimum Energy Performance
posted by V. Miller on Nov 23, 2010, 8:37 am

I am wondering what the correct assumption should be an...

Last reply: Marcus Sheffer, Dec 8, 2010, 11:23 am

Ground-source heat pump and VRV- minimum efficiency

NC-2009 EAp2: Minimum Energy Performance
posted by Yuan Yuan on Nov 14, 2010, 10:23 pm

My project uses ground-source heat pump and also VRV system. However, there is no minimum efficiency requirement in ASHRAE 90.1 for them. How should I fill the ASHRAE compliance form. May I leave...

Last reply: Marcus Sheffer, Dec 8, 2010, 11:10 am