Forum | Page 20 | LEEDuser

Forum

Topic	Replies	Recent
EBOM Templates General forums posted by John Hartley* on Jan 12, 2010, 2:45 pm* Dan, from what you say above, is it not possible then to get the LEED Online templates without first completing the PR's? Does anyone have screen captures (unofficial of course)? Thanks... Last reply: Tristan Roberts, Mar 8, 2010, 1:35 pm	1	Tristan Roberts LEEDuser Expert Representative Vermont House of Representatives Mon Mar 8, 2010, 1:35 pm
SMACNA Chapter 3... Occupied buildings only? NC-2009 IEQc3.1: Construction IAQ management plan - during construction posted by Maya Karkour* on Mar 5, 2010, 11:39 am* Hi, The... Last reply: David Posada, Mar 9, 2010, 2:06 pm	1	David Posada LEEDuser Expert Integrated Design & LEED Specialist SERA Architects Tue Mar 9, 2010, 2:06 pm
CI in a certified CS building General forums posted by Leticia SooHoo* on Mar 3, 2010, 3:20 pm* Andrea, I had a Twitter conversation with Lauren yesterday. LEED geek talk! I went through a similar scenario for a v2.2 project. The building was already CS certified. The tenant would take over... Last reply: Leticia SooHoo, Mar 10, 2010, 12:49 am	1	Leticia SooHoo LEEDuser Basic Member Architect, Senior Project Manager IA Interior Architects Wed Mar 10, 2010, 12:49 am
Temporary wood structures and MRc7: Certified Wood General forums posted by Tristan Roberts* on Mar 8, 2010, 10:36 am* Tri, here is the advice on temporary... Last reply: Tristan Roberts, Mar 10, 2010, 7:26 am	2	Tristan Roberts LEEDuser Expert Representative Vermont House of Representatives Wed Mar 10, 2010, 7:26 am
Estabilishing the Energy use baseline EBOM-2009 EAp2: Minimum Energy Efficiency Performance posted by RASHID HAMEEN* on Mar 9, 2010, 4:43 am* we are a Sri Lankan company and we are planning on going for LEEDS EB OM certification. As we are a foreign entity we are facing problems on how to establish the Energy use base line.Further if... Last reply: Jenny Carney, Mar 10, 2010, 9:45 am	3	Jenny Carney LEEDuser Expert Vice President WSP Wed Mar 10, 2010, 9:45 am
questions General forums posted by Armen Khachikyan* on Mar 11, 2010, 7:41 am* I've read practically all available resources, but I didn't find some details. The fact is that we want to sertify our project in LEED. Now we haven't got completed project, but only ideas... Last reply: Jean Marais, Mar 11, 2010, 7:53 am	1	Jean Marais LEEDuser Basic Member b.i.g. Bechtold DesignBuilder Expert Thu Mar 11, 2010, 7:53 am
building complete 1993 or later EBOM-2009 WEc2: Additional Indoor Plumbing Fixture and Fitting Efficiency posted by Rachael McClain* on Mar 10, 2010, 1:47 pm* I am confused by the table above with the tab that says building completed 1993 or later its says the baseline is 160%, the table also has a tab that says fixtures installed after 1993 or later,... Last reply: Jason Franken, Mar 11, 2010, 10:55 am	1	Jason Franken LEEDuser Expert Sustainability Professional Thu Mar 11, 2010, 10:55 am
Occupant Comfort Levels EBOM-2009 IEQc2.1: Occupant comfort - occupant survey posted by RASHID HAMEEN* on Mar 11, 2010, 2:26 am* Will it be sufficient enough to conduct the survey and to document it to obtain this credit..Does it require to invest on equipments to improve the air quality as most probably we are not planing... Last reply: Tristan Roberts, Mar 11, 2010, 11:31 am	1	Tristan Roberts LEEDuser Expert Representative Vermont House of Representatives Thu Mar 11, 2010, 11:31 am
FTE vs. transient General forums posted by Tristan Roberts* on Mar 11, 2010, 2:56 pm* Neil, let's be clear -- FTEs and transients are two distinct numbers. So it sounds like you're all set with...	0
That I can do. Thanks General forums posted by Neil Rosen* on Mar 12, 2010, 5:30 am* That I can do. Thanks	0

first
previous
…
16
17
18
19
20
21
22
23
24
…
next
last