Hi Everyone,

we have a building which has 37 dual flush for men and 8 Urinals, the Urinals are not in every toilet room (for example there are no urinals in the basement), there will be...

We are having a little trouble with the flow fixture table calculations. We specified Sloan automatic sensing faucets. According to the Additional Guidance document 8/16/10 we're supposed to list...

We are working on a hotel project and encountered some qns:
1. Kitchen Sink faucet
There is no kitchen in the hotel room but kitchens for restaurants. two scenarios: (1) washing hands...

We are working on a project that will include metered urinal faucets with an adjustable 4 - 10 seconds timer. We are planning to regulate the fixtures to 4 seconds.
I did not find Guidance...

We have an office building/warehouse that also has an exhibit/social gathering space with a large number of transients. Some of the building users are closest to unisex toilets only. I defined...

Hello All,

Can you please provide your insight? We have a NC project in Mexico on the cusp of LEED platinum and we've just received our prelim review which asks us to justify our uneven...

We are working in a hotel project where no kitchen sinks have been installed in guest rooms. guests come to restaurants within hotel premises to take meals. so when calculating water use...

If a shower is composed of an overhead shower with 9 lpm and a hand shower with 6 lpm with a diverter (you can select either the overhead shower or the hand shower). Is it correct to assume a...

I'm working on a LEED project in Asia. The water pressure for shower here is set at 3.5 bar (~50 psi). However, the baseline used by LEED is 2.5gpm at 80 psi. If we use the flow-rate at 80 psi...

Hi everyone,
I have a project (residential building) that has a roof terrace with self-service amenities such as kitchenette, chimney, lounge areas, etc. to be used by building residents...