Hello, Appendix G Table G.3.1 - Service Hot water systems states "The service hot-water system in the baseline building design shall use the same energy source as the corresponding system in

We are working on a new constuction in Italy under LEED Certification (NC 2009). An existing building, physically sepatated from the new construction, is located inside the LEED Boundary.

Dear all, I have a polishing powder that is intended to be used for polishing marble surface.

Hi Folks, We received the final decisiona on a very complicated industrial building we are pursuing certification for and EAp2 and IEQp1 were denied.

We are in the process of certifying a Core and Shell building which does not have a previous LEED certification.

We have a project that consists of a cold core and shell that will have warm lobby.

Does this space need to comply with the Controllability credits? It seems dangerous to allow anyone in a hotel pool environment to control the lighting.

Hello, I am working on trying to obtain the indoor environmental quality-thermal comfort credit for a new construction. To be specific, the new construction is a restaurant.

We are in the process of certifying a LEED EBOM project. We have an inquiry for the required 12 months of continuous energy data.

This might be an easy one... Our PI form 2 was recently not approved following final design review.