Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

internal moking area's for an Airport

NC-v4 EQp2:Environmental tobacco smoke control
posted by  Ydo Schuuring  on 

For an extension of an excisting airport that is possible LEED certified, the client desires interior smoking areas to prevent 'illegal' smoking inside the airport.

2
Sustainability Coordinator
WSP Built Ecology
LEEDuser Basic Member
1 thumbs up
Thu Nov 16, 2017, 4:50 am

Fundamental Commisionsing timing question

NC-2009 EAp1:Fundamental Commissioning of Building Energy Systems
posted by  Todd Bundren  on 

Our commissioning agent was involved with creation of the owners basis of design documents, they reviewed the design drawings during the design process to verify they were consistent with the ownen

1
Fri Dec 15, 2017, 5:59 pm

Folding / Operable Partitions?

Schools-2009 IEQc4.6:Low-Emitting Materials—Ceiling and Wall Systems
posted by  Joanna Switzer  on 

I expected that Operable partitions (Div 10 panelized/movable ceiling suspended systems) would need to meet the testing criteria for this credit, but am not having much luck finding qualified assem

2
Default Avatar
Building Envelope Technical Manager
Georgia-Pacific LLC
LEEDuser Basic Member
6 thumbs up
Wed Nov 15, 2017, 7:04 pm

Low Emitting Materials

CI-v4 EQc2:Low emitting materials
posted by  Laurie Johnson  on 

Is it possible to choose voc budget Option 2 for one catagory and Emisssions Criterial Option 1 for other categories or is it all one option or the other?

1
Fri Mar 23, 2018, 3:14 pm

Option D: Calibrated Simulation

Healthcare-v2009 WEc2:Water use reduction - measurement and verification
posted by  Brett Farbstein  on 

The WEc2 template references US DOE’s International Performance Measurement and Verification (IPMVP) Option D: Calibrated Simulation as the approved method for the M&V plan.

4
Partner, Architecture & Sustainability
DIALOG
LEEDuser Premium Member
449 thumbs up
Wed Nov 15, 2017, 11:44 am

Difference in hours of operation

NC-v4 EAp2:Minimum energy performance
posted by  Charalampos Giannikopoulos  on 

When applying daylight sensors in a project the amount of EFLH between proposed and baseline model will differ since the power of lighting is reduced.

1
Tue Nov 14, 2017, 4:34 pm

LED screens for Light Pollution Reduction

CS-v4 SSc6:Light pollution reduction
posted by  Nuttanee Vongveeranonchai  on 

Hi all, I have some questions about a LED screen for this credit, light pollution reduction.

1
Tue Nov 14, 2017, 4:19 pm

IAQ Testing using hand-held instruments

NC-v4 EQc4:Indoor air quality assessment
posted by  Shijo John  on 

I currently have different TSI instruments which have the capability to measure Total VOCs, PM 2.5 & 10 and CO.

1
Tue Nov 14, 2017, 4:32 pm
6
Director
DVA Energy
LEEDuser Basic Member
37 thumbs up
Wed Nov 8, 2017, 1:44 am