In DesignBuilder for the daylight simulation you have to impose a value for the parameter "margin", which is defined in the following way: Enter the margin (in m or ft) around the zone boundaries w

Dear colleagues, maybe my question will be stupid, but I hadn't found a strict answer, so I'm a little bit confused. We have a project that has no permanent irrigation system, only a has a hose bi

We were recently denied a credit in the Final Review Phase on the basis of information that was presented in the Preliminary Review Phase that GBCI had no comments upon.

Hello, I would like to get confirmation on whether the following approach of demonstrating compliance with LEED requirements could be accepted or not.

I am calculating the percentage of materials that contain recycled content. It says MEP type work is not to be included in the calculation.

We received our preliminary design review comments back and were asked to include a daily average visitors number. Our average users value is 3, peak users value is 27, and the FTE value is 3.

Heads up that an updated list came out in September 2013 and can be accessed here - www.sfenvironment.org/sites/default/files/fliers/files/sfe_th_pesticides_reviewed_091313.pdf We'll be updating

Hi, The credit says that for applying the points, minimum 5% of the site area shall have planters, garden etc. Does the potted plants are counted under planters.

Hello.

Our project is located in a city that has a mild climate year round and outdoor activities are common and in demand.