Hi all,

If we use non-potable recycled water supplied by local government, can it be eligible for the point?

The recycled water is still not available for the whole country (...

Hi,

when i look at SSC1 path 4, i keep asking the above question to myself,

therefore, which one is the correct defination for "2. indentify all hardscape surfaces that are open...

There were exterior and hardscape management procedures in practice in the past which are LEED compliant. A...

Hi all,
i facing some difficulty to look for runoff coefficient value for open grid paver made locally here in Taiwan. Does LEED give any default value for open grid paver?
any advice...

In this pre-requisite we are following 'Option A' and filling in details in the 2007UM_62MZ Calculator.

Further,filling in the online template column 3 in Table 1.1 requires "Minimum...

According to the 2009 reference guide an exemplary performance point is not available for MRc8 (pg. 314). However, the actual credit template allows you to mark it for the extra point. And...

On first submittal of this credit, we got the comment that our project was actually in an LZ-2 zone instead of an LZ-3 zone. We've always decided which zone our project is in based on the...

Under the Fixture Group Column; What goes is supposed to be typed in the 'Select' Column?

How do we go about transferring the data from the provided LEED template to the online form? (Assuming there is an easier way than re-entering all the info? )

Thanks for your help!

I can not figure out how to calculate this for a core and shell office building that is 3/4 leased.