Hi , We have an interior project specifying kitchen appliances like electric fryer , which are not energy star labelled so we are checking the equivalency for which we require idle rate and cook

Our project involves demolition. There are some materials - wood beams, bricks - that will likely be either donated to a reuse center or sold.

My project is a Housing Authority remodel that has to meet Energy Star, thus be ASHRAE 55 compliant.

Hai Everyone:- Our project is sewing factory It is not fully conditioned (A/C & Ventilation) 1.A/c for Office area 2.Fans (Exhaust, Fresh air, HVLS fans) for Production area We use HVLS fan

We have Project intending to be registered under LEED 2009 BD+C for major renovations.

Dear All, I have two issues where I don't really know what would be the proper solution. 1. After about 10 years one of the compressors in a chiller went wrong and has been replaced.

We have Project intending to be registered under LEED 2009 BD+C for major renovations.

Hi All, I am working on a project with warehouse space which is heated and ventilated with heating capacity greater than 3.5 Btu/hr ft2 and falls under the semi heated space category. My question

We have a project in Rio de Janeiro that is near to the beach (between 1/2 mile).

Hello. I'm working on the design of a hospital and there is a doubt in the table 1.3-1 of the Sound & Vibration Guidelines FGI. The hospital is located 2600ft from the runway threshold .