Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Using RCR calculation in an open office.

NC-v4 EAp2:Minimum energy performance
posted by  VEL MUTHU  on 

All, 

I am currently working on a office facility/building. When i tried to do the LPD calculation for Energy simulation. I came across few doubts listed below.

1
Mon Jul 30, 2018, 8:12 pm

Use of Recharge Pits for credit compliance

EBOM-v4 SSc2:Rainwater management
posted by  Aarti Dhar  on 

Will the Use of Rainwater recharge pits comply with the credit requirement?

0

IEQp1 form - Selecting Critical Zones

EBOM-2009 IEQp1:Minimum IAQ Performance
posted by  Madushan Samarakoon   on 

How to answer the following requirement in the IEQp1 form when you already filled the Minimum IEQ perfromance calculator with all occupiable zones in it and it has already automatically selected th

2
Practice Leader - Sustainability
EUA
LEEDuser Expert
510 thumbs up
Mon Jul 30, 2018, 12:18 pm

Existing Buildings

NC-2009 EAp2:Minimum Energy Performance
posted by  David Tratt  on 

Do I understand correctly from 90.1 Table G3.1 item 5f for baseline building that I can input the existing envelope conditions in the baseline model in lieu of the 90.1 minimum envelope requiremen

7
Sun Jul 29, 2018, 6:39 pm

Addition to an existing LEED Certified Building

CS-v4 MPR2:Must use reasonable LEED boundaries
posted by  maria esther lamadrid  on 

I have an existing LEED Certified Core & Shell v2009 Project where there will be an addition of about 40% more.

0

MSA hard hat safety advisory

SC Leaders
posted by  Jennifer Taranto  on 

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking.

0

Choosing LEED ND Plan vs Built Project

LEED Rating System Selection
posted by  Susan Di Giulio  on 

Where can I find more in-depth information about how to choose between these two versions of LEED-ND v4?

1
Fri Jul 27, 2018, 6:25 pm

Parking Area Square Footage

NC-2009 PIf2:Project Summary Details
posted by  Jim Pugh  on 

With respect to calculating the "Square footage of all parking areas" . . .

1
Fri Jul 27, 2018, 5:01 pm

New V4 Project Boundary Overlaps Existing V2009 Project Boundary

NC-v4 MPR2:Must use reasonable LEED boundaries
posted by  Doug Shilo  on 

An existing V2009 Project is getting an expansion that will fall under V4.

3
Director of Sustainability
Fentress Architects
LEEDuser Expert
224 thumbs up
Fri Jul 27, 2018, 3:17 pm

Rounding off the percentage to nearest whole number

NC-2009 MRc4:Recycled Content
posted by  Vibha Pai  on 

I am working on the certification of a mixed use building and the recycled content used on the project is currently at 9.56%. Can it be rounded off to the nearest whole number a

0