Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Parking ventilation/exhaust

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Charalampos Giannikopoulos  on 

As per ASHRAE 62.1 parking areas are subject to requirements for exhaust air and not ventilation rates. Accordingly, parking areas are not included in IEQp1, are they? Thanks in advance!

1
Wed Oct 5, 2016, 6:28 pm

Exceptional calculation for process load

NC-2009 EAp2:Minimum Energy Performance
posted by  Charalampos Giannikopoulos  on 

What would be the process of an exceptional calculation to prove reduction in process office equipment density for an office building?

1
Wed Oct 5, 2016, 7:26 pm

Thermal Comfort - ACP for Projects in India

NC-2009 IEQc7.1:Thermal Comfort—Design
posted by  Gopinath Vasu  on 

Dear All, Kindly clarify the following query regarding Thermal Comfort Design Alternative Compliance Path for projects in India. In ACP it is said that projects shall meet the desired comfort con

1
Thu Dec 22, 2016, 9:26 pm

Lighting Control

EBOM-2009 IEQc2.2:Controllability of Systems—Lighting
posted by  VISHESH AGARWAL  on 

I am working on the project where whole building have occupancy sensor. does need to install 50% of the multi occupant space have lighting control by dimmer.

1
Thu Oct 6, 2016, 4:23 pm

Green e energy equivalency EKOenergy

CI-v4 EAc6:Green power and carbon offsets
posted by  Valentin Grimaud  on 

Good afternoon, I'm working for a design building company in France. We aim the LEED certification for a shop project. We try do get 2 points for the Green Power and carbon offset credit.

1
Wed Jan 18, 2017, 4:25 pm

Enhanced Cx - EAc3;

NC-2009 EAc3:Enhanced Commissioning
posted by  Miles Britz  on 

Systems Manual; on our Const. Phase submittal the reviewer stated we need to include a Systems Manual. It appears this refers to the Training of staff on the bldg.'s.

1
Fri Oct 21, 2016, 7:57 pm

Applying for LEED after the building is finished

NC-2009 MPR6:Must commit to sharing whole-building energy and water usage data
posted by  Ciaran McCabe  on 

This is a very general LEED question however is it possible to apply for LEED accreditation for a new building that is finished and handed over to client.

1
Tue Jan 17, 2017, 9:49 pm

Critical zone

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Charalampos Giannikopoulos  on 

IEQp1 form v06 has a new requirement to describe "how critical zones are selected and how all occupiable zones are accounted for in the determination of the critical zone.

1
Wed Nov 2, 2016, 12:49 am

glare control features in retail

CS-2009 IEQc8.1:Daylight and Views—Daylight
posted by  Anna Bak  on 

Hi, I'm working on the building that on the ground floor has an entrance lobbby with a desk for receptionist and some retail space. On the upper floors we have an office space.

1
Thu Oct 20, 2016, 1:34 pm

Open Space

NC-v4 SSc3:Open space
posted by  Jorge Lopez de Obeso  on 

Hi, in order to getting to know the new V4 we are taking a look at each credit and start to getting familiar with them. The leed reference guide doesn't use the same project in both examples for fu

1
Wed May 31, 2017, 2:38 pm