"Option 2. Optimize Water Use for Cooling" if they meet the eligibility criteria described in the Step-by-Step Guidance. In another forum on this matter titled "No Cooling Tower option...

We are submitting a LEED v4 BD+C NC project with LEED v4.1 upgrades on a credit-by-credit basis. Minimum and Optimize Energy Performance have remained v4. We are interested in pursuing the v4.1...

It appears that Option 2, "No Cooling Tower," has been removed from this credit with addendum #10002465.

Hello,

Let's say that my project has a bad quality of potable water, and the concentration levels are the same as Table 2. Therefore, the maximum number of cycles would be "1 cycle".

The guideline said to maximize the number of cycles by not exceeding the maximum concentration level. However, it's unclear what is the maximum cycle numbers that LEED is looking for. In LEED v4...

Hi,

We are investigating the potential to demonstrate that the cooling solution in our project is more water efficient than a baseline according to LEEDv4.1 Optimize...

Hi!

It is unclear to me what does the total building regulated water use means in this case. Is this equal to the indoor water use (plumbing fixtures use) calculated in the prerequisite?...

Dear All

 
We are working in a project were potable water supply has very low concentrations of Cl- (about 15 ppm, 20 times below the maximum level defined in credit language).

Our project is a LEED v4/v4.1BD+C new central cooling plant which uses geothermal for cooling on a university campus.  Besides the plant, the building has office areas for the operators of the...

we have a residential project with no cooling tower, if it is eligible for Option 2？