Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Using Chilled Water Pump similar to ASHRAE 90.1

NC-2009 EAp2:Minimum Energy Performance
posted by  Michael Wahjudi  on 

Hi, we have development where the Chiller Plant is serving three buildings.

5
Thu Aug 25, 2016, 1:16 pm
Default Avatar

Reuse of laboratory equipment and furniture

NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materials
posted by  Isabel Santos  on 

Dear all, We are assessing a renovation project according to LEED v4.

4
Profile picture for user pmelton
Paula Melton
Editorial Director
BuildingGreen, Inc.
LEEDuser Expert
159 thumbs up
Thu Aug 25, 2016, 10:21 am

Non potable water systems

NC-v4 EAc1:Enhanced commissioning
posted by  Gustavo De las Heras Izquierdo  on 

Does anyone know if non-potable systems are included in the scope of this credit? I am referring to gray water, stormwater, water treatment plant and irrigation systems. Thanks

9
Default Avatar
Rebecca Rice
Sustainability Consultant
NORESCO
LEEDuser Basic Member
3 thumbs up
Wed Aug 24, 2016, 5:05 pm

GRI Sustainability Reports

Pilot-Credits MRpc53:Responsible sourcing of raw materials
posted by  Christine Robbins-Elrod  on 

It's unclear where GRI-checked reports fall under the credit requirements - would they be considered self-declared for 1/2 value or third-party verified for full value?

2
Profile picture for user ckb
Chloe Bendistis
Sustainability Technical Manager
The Sheward Partnership, LLC
LEEDuser Basic Member
17 thumbs up
Wed Aug 24, 2016, 2:16 pm
Default Avatar

Post- industrial Recycled content in Ceramic Tiles

NC-2009 MRc4:Recycled Content
posted by  María Fernanda Aguirre  on 

There is a Company which has sent to us some certificates indicating their ceramic tiles have different percentages of pre-consumer recycled content (depending on the model) according to the next p

3
Default Avatar
MKK LEED
MKK Consulting Engineers
LEEDuser Basic Member
1 thumbs up
Wed Aug 24, 2016, 10:52 am

Excellent Modeling Guide

NC-2009 EAp2:Minimum Energy Performance
posted by  Marcus Sheffer  on 

In case you have not seen this relatively new guide I would highly recommend it to help with your modeling issues. ANSI/ASHRAE/IES Standard 90.1-2010 Performance Rating Method Reference Manual h

7
Profile picture for user santiago5
Santiago Velez
ASHRAE BEMP HBDP - LEED GA, Building Performance Consultant
Zonda
LEEDuser Basic Member
14 thumbs up
Tue Aug 23, 2016, 4:18 pm

Normalizaiton

EBOM-v4 EAp2:Minimum energy performance
posted by  Muzammal Abbas LEED AP (BD+C)  on 

I am working on a industrial project registered in Existing building Operation and maintenance located Out of US , that have its own electricity production of 4 Mw through gas engines and its free

11
Tue Aug 23, 2016, 1:01 pm

Typical items types for typical office

NC-2009 MRc6:Rapidly Renewable Materials
posted by  Jean Marais  on 

In your experience, which items must be included as rapidly renewable to achieve 2% by cost. Is it, for example, typical to say 1) Floor covering and, 2) Ceiling panels I am struggling to see how

2
Profile picture for user tristanroberts
Tristan Roberts
Founder & Community Director
Metricorps
LEEDuser Expert
7780 thumbs up
Tue Aug 23, 2016, 6:02 am

leedonline offline?

Navigating LEED Online
posted by  Caroline O'Leary  on 
I have been attempting to access leedonline for the last 20 minutes and receive the following: This page can’t be displayed •Make sure the web address https://www.leedonline.com is correct. •Look for
9
Mon Aug 22, 2016, 9:37 pm

control of PIU fans for System 8

CS-2009 EAp2:Minimum Energy Performance
posted by  Francesco Passerini  on 

Shall the PIU fans of System 8 cycle according to paragraph G3.1.2.4?

3
Mon Aug 22, 2016, 8:48 pm