We have been pursuing Strategy E, Option 2 in the Interior Lighting credit.  We have sealed concrete floors in most of the spaces, which is obviously done in the field and there is no...

The interior lighting of our projects has 3 zones for dorm rooms, but has dimming with manual on/ automatic off controls. There are also daylight zones. Can the dimming meet the 3 lighting levels...

Hi All,

We're working on a project that has a number of internal floor-to-ceiling glass walls, some of which are transparent and others are semi-transparent. I'm wondering how those are...

There is quite an issue of concern on LRV weighted average calculations on our project per the EQc6 credit, as the project team requires an urgent response to this, please see details below:...

Does a large multi-gender restroom count as a shared multi-occupant space requiring three lighting levels? As defined in the reference guide, a shared multi-occupant space is "a place of...

I am trying to figure out how to integrate microlouvers in a double-skin façade.

The architect has decided that only 50% of the louvers would be operated by the user...

Does...

Has anyone ever proposed that 1 task...

Has anoyone gained Option 1 using an IP based control system. If every light fitting can be controlled via an IP based system will this achieve complaince with Option. Each light fitting in an...

IF I have a lighting fixture with direct light, however, the fixture's glass is translucent / white glass. i.e. I can't see the light source through it but can only see a white lit surface, ...

The cutsheet of our concrete sealer says 45-65 @60 degrees for the gloss/sheen. Does anyone know, if that is the % reflectivity number we should use or is there a forumla for accounting for the...