Hi, I am helping a client, they have a light industrial project that has a workshop in the back area and an office mezzanine. The workshop has a double height area with a skylight and an overhead...

According to Reference Guide, manual or automatic (with manual override) glare-control devices shall be provided for all regularly occupied spaces in order to comply with credit requirements....

Greetings,

There is a question related to Option 3 of EQc4 – Daylight.

It has been mentioned (page 725), quoting: “Take one measurement in any regularly occupied month…”.

The...

In a Core and Shell project Office Tower that is over 50 stories, the rule is still measure all regularly occupied spaces in the building? That could mean over 50 floors of measurements?  Or is...

Similar to how we would address views in a core and shell project, can Option 3 measurements be conducted based on a representative floor plan(s) or would measurements need to be conducted for...

We are using Revit Insight software for daylight stimulation for (V4.1) option 1

Insight has built in settings for LEED daylight credits, Do we have to model blinds in the Revit model to...

I was wondering if someone can help here. Working on a v4 C&S 5 story building. Some of the tenant space on each floor is laboratory space (40% approximately of each floor). In these spaces...

I know there is a must in the rating system variations; but is there any chance in C&S to exclude areas that are defined as regularly occupied? There is an unanswered question here on...

Dear All, 

I found that Sefaira has calculated sDA and...

We've added a new Frequently Asked Question on this credit: Can I use Revit to document this credit?