Hello,

In order to meet EQp1 requirements, do non-residential projects need to address radon issues in the first 4 floors? It is my understanding that only residential projects need to...

Hi, 

We are working in a Healthcare facilities project. How can we document compliance with the minimum Outdoor Air Changes required by ASHRAE 170-2008 Table 7-1?

How can we...

Would it possible to input zero for an occupiable storage rooms for liguids and gels in the Minimum...

Hello,

We've multifamily high rise project that is pursuing LEED NC V4 certification. As per current design, the apartment units are mechanically ventilated and have continuously running...

Francesco Passerini engineer LEEDuser Basic Member 90 thumbs up June 7, 2018- 9:05 am This discussion has been copied in EAp2: https://leeduser.buildinggreen.com/forum/waste-rooms-0 Log in or register to post comments ...

Hello everyone,

I have a question about the location and sizing openings, in the building we have spaces with double side openings, in opposite facades. The 6.4.2 section specifies that...

On our project we have a few spaces like corridors and break rooms with kitchen area which don't have a direct ducted air supply from the...

Is the IEQ Space Matrix still relevant for this Prereq under v4? Under v3 there were some differences between ASHRAE-applicable spaces and LEED-applicable spaces.  Wondering if that is still the...

We are deciding between the use of EN 15251 and the use of ASHRAE 62.1. Do you have experience in applying EN 13779–2007? I've started to read that and I'm wondering whether there are aspects...

The corridors are separated from the staircase by two doors in order to create a space (buffer space) whose walls and doors are fire-resistant. That space is ventilated through a ventilation duct...