Can you take credit for occupancy sensors that control HVAC systems? I am thinking probably not for system operation E.g setbacks, agree? But I am unsure for the ventilation. It seems a bit...

Hello,

We have a project where some luminaires have more power than what it is required by the mandatory provisions of exterior lighting power.
However the actual power necessary to...

My question is regarding the EAp2 and EAc3, our project consists of a palm oil manufacturing facility. The energy intensive manufacturing process exceeds an estimated 90% of the facility's total...

for many of the other Credits and Prerequisites. For more on the Campus Guidance, see the LEEDuser forum http://www.leeduser.com/topic/new-leed-guidance-campuses-and-multiple-bu.... On the other hand,...

Hello Marcus,

i want some clarification regarding HVAC Baseline and Proposed model. According to Table G3.1.1A and Table G3.1.1B and as per proposed building type and heating fuel the...

We are running into a situation where the insulation is slightly under the R38 (R34.8) that is required per ASHRAE 90.1 yet the energy model shows we are over 10% energy efficient. Will this...

Dear All,
i am doing a energy simulation for bank building. software have no option LEED Rating V4. It have only LEED 2009 rating system. Can i use this rating system for V4 only in...

Hello Marcus,

1.My project orientation on NW,NE,SW and SE. But V4_Minimum energy performance calculator_spreadsheet have only North,East,West and South options, and spreadsheet not allow...

Exception c requires that lab spaces use a system 5 or 7 in the same way that exception d does, but exception c does not prescribe any specific turn down during unoccupied periods. Does this...

It is making energy simulation for a logistic center for storage.
Local regulations based on European regulations not required to be heated, instead ASHRAE required to be heated.

...