Hi,

In one of the projects, there are no cooling tower. There are no AC Spaces in our project, and hence for the energy simulations ASHRAE 90.1 2010 Appendix G Space System 10 is selected...

Hi,

If our project(s) have No cooling tower and no district cooling, can we not take the credit based on that our buildings are too small and that they are residential (nursing homes)? Is...

Hi All,

How do we control the maximum number of cycles of the cooling tower?

Is it by controlling bleed off rate and make-up water rate according to the following method which I...

Hi All,

How do we control the maximum number of cycles of the cooling tower?

Is it by controlling bleed off rate and make-up water rate? 

Thanks in advance!

...

Good afternoon,

The reference guide lists Rainwater as a good non-potable water source for make-up water. The proposed cooling tower manufacturer raised the following concern for use of...

Our project is on a University campus, which utilizes a Distrcit Plant.  There is no Cooling Tower directly within our project, but there is one at the District Plant.  Can we count the District...

The documentation requirements for WEC3 requires the non-potable water analysis if using 100% non-potable (for 2 points).
As per points table, for 2 points threshold, min 20% non potable...

The credit is pretty vague about defining the "maximum number of cycles without exceeding any filtration levels". Does this need to be exact (to the gallon over a year)? For example, one of my...

Hi, based on a water test report, if the number of cycles already exceed 10, does that mean that both points are achievable? The calculations for the project indicate the lowest number of cycles...

Hi,

If a project has dry cooling, a type of cooling tower, can it than get this point? It is my understanding that there are several types of cooling towers, in Sweden we normally use dry...