Hi, We are working on a school project in the Cincinnati, Ohio area. We have multiple...

Hello,
Our project is a LEED NC v2009. Due to a heavy rain season, it happened that some leakage lead to a partial grow of mold in some ceiling areas which are made from gypsum boards. The...

I am in the process or completing IEQc10 credit form. The credit form lists a required upload as "Upload IEQ10c10-1. Provide humidity calculations at peak conditions, both occupied and...

We're thinking about going for this credit for a Hospital project (NC v2.2), since code requires all hospitals to have strict mold prevention measures. Does the fact that we're complying with...

We often design UV lights to sterilize intake air in an effort reduce mold growth. Is this an acceptable strategy for achieving this credit? Is it worthy of an ID credit?

Either way; what...

Do we need humidity control on every single heat pump that is in the builidng? We are using ERV's throughout the project but don't know exactly what other equiptment and/or what cost premium may...

Has anyone actually made "a plan" for this credit? based on the I-BEAM or EPA document references, this document could be of incredible length, with charts, tables, complaint logs, etc. Has...

I am wondering if anyone has experience with this credit, and where the RH sensors are required. We typically integrate them with the thermostat, however, we do not have a thermostat in every...

How could a school project gain an Innovation in Design point under this credit?

Is it possible to achieve this credit with a naturally ventilated building located in northern California