Dear forum,

I hope the following help request is falling under the right LEED version, since the calculations I am running are following the guidelines of CS2.0 as the design studies of...

I am currently working on a school project using option 2 on the IEQ 8.1 form. Many of the rooms have a VLTxWFR ratio that exceeds 1.8. The rooms do not have automated shades (they have black out...

I am using the Supplemental Daylight and Views Calculation Spreadsheet that was provided by the USGBC website under resources. Once I filled in all the available lines I attempted to add a row...

Hello
i am working on IEQ 8.1 and 8.2, I use simulation methods in 8.1. my question is that can i use diffrient draws in two credit? in 8.2 i used draws include finish and patitions,...

In the form, I need Provide an output summary from the daylight computer
simulations. does it exist a template to do it? if not, does it need which information in the reports? just some...

We received a comment on interior spaces that are using "borrowed light" from interior glass doors, sidelights and transoms. We used a glazing factor calculation designed for simple geometries...

Hi !

Running daylighting analysis on a 4 stories building, assuming 3 floors have more than 75% of natural daylight between 10fc-500fc in regularly occupied space, whereas the last floor...

Seen some of the comments up there... But I wanted to ask if the blinds that are required as part of the glare control in IEQ 8.1 ... can they be simple manually controlled internal blinds... or...

Hello!
I am working with the new Supplemental Daylight and Views Calculation Spreadsheet, prescriptive option. There is a column "Glare Control Type for spaces with VLT X...

LEED reference guide said that in Option 1 compliance should be demonstrated through computer simulation of all regularly occupied spaces. Is it necessary to perform the simulation for absolutely...