Log in
Forum » CS-2009 EAp2
Topic

Service Hot Water

CS-2009 EAp2: Minimum Energy Performance
posted by Anna Korinkova on Feb 27, 2014, 10:16 am

Dear fellow LEEDusers.
Our...

Last reply: Marcus Sheffer, Feb 27, 2014, 10:41 am

Toilet Light Shut-Off

CS-2009 EAp2: Minimum Energy Performance
posted by Marina Andrade on Feb 17, 2014, 5:38 am

Hi,

bathrooms can have a manual shutdown device for lighting?

It is mandatory that all toilets automatically switch off the lighting?

Thanks

Last reply: Marina Andrade, Feb 17, 2014, 12:12 pm

EAp2 form issue on table 2-6

CS-2009 EAp2: Minimum Energy Performance
posted by charles bell on Feb 13, 2014, 3:46 pm

Our project is a CS mixed use: hopefully this is not too general a question.
We cannot get the table EAp2-6 to pull down results from the previous tables. Have you any experience with this...

Last reply: Marcus Sheffer, Feb 17, 2014, 11:38 am

after the first review,change the energy modeling softare.

CS-2009 EAp2: Minimum Energy Performance
posted by tiantian zhou on Feb 12, 2014, 4:48 am

Dear sir,
some problem occured to our project when we made the second submission. We have to change the energy modeling softare and remodel. Is it ok? So thanks!
Yours,
tiantian...

Last reply: Marcus Sheffer, Feb 12, 2014, 9:16 am

outdoor air rate in area where uses demand control strategy

CS-2009 EAp2: Minimum Energy Performance
posted by tiantian zhou on Feb 11, 2014, 9:12 pm

Dear sir,
in our project,the meeting room uses CO2 sensor to control the outdoor rate and the parking garage uses CO...

Last reply: Marcus Sheffer, Feb 12, 2014, 9:08 am

LEED DESv2, System 8 and Chilled Water Temp Reset

CS-2009 EAp2: Minimum Energy Performance
posted by Matt Humphreys on Feb 10, 2014, 5:21 pm

For baseline HVAC system #8 modeled with purchased chilled water according to Option 1 of Treatment of District or Campus Thermal Energy in LEED v2 and LEED 2009 guideline, does the Chilled-Water...

Last reply: Marcus Sheffer, Feb 11, 2014, 10:23 am

Tennant Space Layout

CS-2009 EAp2: Minimum Energy Performance
posted by Matt Humphreys on Jan 22, 2014, 6:02 pm

The LEED reviewer for a Core and Shell Office Building has requested the design team to illustrate a hypothetical layout of the tenant spaces to document the potential for Daylighting/Views...

Last reply: Matt Humphreys, Feb 10, 2014, 5:21 pm

Facade lighting for advertising

CS-2009 EAp2: Minimum Energy Performance
posted by Lolita Wu on Jan 25, 2014, 9:43 pm

We have a question about facade lighting for a retail project. As the mandatory requirement, building facade lighting shall not exceed 0.2W/ft2 for each illuminated surface. But advertising...

Last reply: Marcus Sheffer, Jan 27, 2014, 10:22 am

Help with table G3.1.1A,B

CS-2009 EAp2: Minimum Energy Performance
posted by charles bell on Jan 23, 2014, 3:50 pm

The project consists of non residential building of 6 stories. The proposed design consisted of the first floor (retail spaces) being served by water source heat pumps with the primary heating...

Last reply: Marcus Sheffer, Jan 24, 2014, 10:13 am

Site Lighting for Campus Plan

CS-2009 EAp2: Minimum Energy Performance
posted by charles bell on Jan 23, 2014, 3:42 pm

Hello,
We have a campus application for our 3 mixed-use buildings. We are now on our final review and need to modify our submittal. We submitted the site lighting calculations not taking...

Last reply: Marcus Sheffer, Jan 24, 2014, 10:02 am