Hi there,

When a proposed building model includes parking garage DCV based on CO - How should the control of the baseline model garage fan volume be controlled?. Should the baseline model...

Hi everyone,
I have to model system fan power in...

We have a C&S project and are planning the energy simulation for EAp2 and EAc1. I think we can use ACP revised points thresholds for our project, but would like to make sure if there are any...

On a C&S healthcare building, we simulated the receptacle load based on CS Appendix 2, Table 1, as the appendix directed. The reviewer commented that the value of 1.5w/sf was higher than the...

I am working on simulation with Carrier's HAP. I have to model baseline system 8 (...

We are working on a small retail store 18,000 sqft and we are considering pursuing the prescriptive compliance path AEDG (option 2) to meet EAp2. We fall under zone four which has a 3% skylight...

I have two questiones:
1. Pressure drop adjustment for heat recovery in the baseline fan power calculations can be taken only if the heat recovery is modeled in the baseline case regardless...

We have a large scale international project in the eastern Europe. Exterior light design...

Hello,

I have two questions:

1) we are working on residential building where its occupied spaces has heating and cooling, but rooms situated on north facade has no cooling system....

Hello,

I did some research to find a similar question on this forum before posting it, but even though there were several questions related to the topic, I did not find the exact situation...