Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

T2, T4, T6

Healthcare-v2009 MRp2:PBT source reduction - mercury
posted by  Gustavo De las Heras Izquierdo  on 

This credit does not allow installing T9, T10 or T12 fluorescent lamps. This credit provides a criteria to specify T5 and T8 fluorescent lamps. Are there any requirement for T2, T4 and T6 fluores

2
Fri Mar 14, 2014, 5:59 pm

Mech. exhaust fans required for a naturally ventilated project?

CS-2009 IEQp1:Minimum IAQ Performance
posted by  Ron Dean  on 

I'm working in a small project with natural ventilation overall. Considering these 3 facts: 1. LEED states to comply with sections 4-7 of ASHRAE 62.1-2007. 2.

2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Fri Mar 14, 2014, 4:19 pm

LEED CI 2009 M&V metering requirements

CI-2009 EAc3:Measurement and Verification
posted by  Patrick Salmon  on 

Our company is in the process of determining whether a commercial interiors project is ideal for the EAc3 submetering option for Case 1.

3
Default Avatar
EIT, LEED AP BD+C
Highland Associates
LEEDuser Basic Member
0 thumbs up
Fri Mar 14, 2014, 3:28 pm

Tenant space fan & pump sizing

CI-2009 EAc1.3:Optimize Energy Performance—HVAC
posted by  Mike D  on 

We are a bit confused as to the meaning of space fan and pump sizing? Could anyone please offer some clarification? Thanks!

9
Default Avatar
LEEDuser Basic Member
45 thumbs up
Fri Mar 14, 2014, 3:16 pm

Air flow measurement for non densely occupied zones

NC-2009 IEQc1:Outdoor Air Delivery Monitoring
posted by  Magda Aghababyan  on 

Dear Sir/ Madam, I have a project that is a hotel with 200 guest rooms that are non-densely occupied. Each guest room floor (20 rooms per floor) is supplied with 3 AHUs.

6
Fri Mar 14, 2014, 3:47 am

Metering domestic hot water for kitchen - exemplary point in WEc

EBOM-2009 WEc1:Water Performance Measurement
posted by  Tom Kennedy  on 

Our project is a large office building with commercial kitchen (in house breakfast/lunch, etc).

2
Director - Green Building Advisory
Colliers International Ltd.
LEEDuser Basic Member
201 thumbs up
Fri Mar 14, 2014, 1:44 am

ASHRAE forms for vrv systems

CI-2009 EAp2:Minimum Energy Performance
posted by  Yaser Al Sharif  on 

Our System is VRV , and the hvac Ashrae forms - part 1 and 2 - does not comply with vrv system - how we could comply with them and many of them does not comply with vrv system ???????????

3
Thu Mar 13, 2014, 2:29 pm

CO2 sensors in Residential Project

NC-2009 IEQc1:Outdoor Air Delivery Monitoring
posted by  Ilana Judah  on 

We have a large residential project that has natural ventilation being used. Are CO2 sensors required in every room/bedroom of the apartments?

3
Default Avatar
LEEDuser Basic Member
0 thumbs up
Thu Mar 13, 2014, 2:16 pm

Using a newer version of 90.1 than what LEED specifies

NC-2009 EAp2:Minimum Energy Performance
posted by  Dave H  on 

I am working on a project that was registered under LEED NC 2.2. Will the USGBC allow us to apply requirements from 90.1 - 2010 to the project instead of 90.1 - 2004?

8
Default Avatar
LEEDuser Premium Member
19 thumbs up
Thu Mar 13, 2014, 1:22 pm

Owner Furnished Task Lighting

NC-2009 IEQc6.1:Controllability of Systems—Lighting
posted by  Ryan L  on 

Under ASHRAE 90.1-2007 task lighting must have automatic shutoffs; the owner prefers not to install occupancy sensors/shutoffs at individual workstations.

3
Thu Mar 13, 2014, 8:46 am