Forum quick links
Sound Transmission
NC-v4 EQc9:Acoustic performanceposted by Mark Zoeteman on
Sound transmission requirements for adjacency combinations are listed in Reference Manual Table 1.
M&V Plan Doubt
NC-2009 EAc5:Measurement and Verificationposted by Marina Andrade on
Hi everyone, i'm studying the protocol of measurement & verification, and checked out some necessary points which must be in the plan but did not quite understand.
Exterior lighting artwork - Process Load
NC-2009 EAc1:Optimize Energy Performanceposted by Victoria Watson on
Hi, I am working on a project where they are proposing a lighting installation forming a piece of artwork. They are asking whether it can be excluded from the LEED calcs.
reused water for cooling towers and process saving
NC-2009 WEc3:Water Use Reductionposted by Renaud Gay on
Hello We work on an pharma project and we want to resuse MAU condensate, on-site treated waste water and rain water to supply toilets, irrigation and Cooling towers.
Qualification for Credit
EBOM-2009 SSc6:Stormwater Quantity Controlposted by Wendy Lao on
My site has no stormwater management facilities. It is surrounded by natural vegetation/open space, and parts of the land has hills.
VOC Testing - ISO EU Standard
NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatingsposted by Nowfal Kunju Muhammed on
If VOC content is mentioned as per ISO EU standard, is it acceptable for LEED?
Ashrae 90.1.2010, HVAC Table 6.8.1.C Water Chiling Packages Eff.
NC-2009 EAc1:Optimize Energy Performanceposted by ABHIJIT PISAL on
In the table there is a mention of Path-A and Path-B. Pl. help as to how to interpret Path-A and Path-B.
Urban agriculture in high density, zero lot line project.
NC-2009 SSc5.1:Site Development—Protect or Restore Habitatposted by Nadia Ayala on
Hi everyone, I have a project in Mexico where we are trying to create a rooftop food garden.
Documentation if the building structure remains the same
CS-2009 MRc1:Building Reuse—Maintain Existing Walls, Floors and Roofposted by Nicole Isk on
We have a Major Renovation project where NO changes on the building structure will occur.
Data center - Baseline HVAC System
NC-v4 EAp2:Minimum energy performanceposted by Vassil Vassilev on
Hi Markus and all coleagues, In the Data center I'm about to start modeling, there are 4 IP rooms. Each of these rooms has IP load with a power density of 3.2 kW/m2 or 297 W/ft2.