Forum quick links
Single certification for physically distinct structures
NC-v4 MPR2:Must use reasonable LEED boundariesposted by NAMRATA GUPTA on
We are pursuing LEED for a hotel cum resort project with 80 individual villas plus main admin block, spa block, utlity blocks etc.
MPR LEED v3 vs v4
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Lise Dannesboe on
Hi! There are quite some differences between MPR v3 and v4. USGBC has published a supplemental guide on MPR for v3. Is there something similar available for v4?
Three buildings, one garden
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Lawrence Lile on
We are developing a farmer's market. It will be associated with a community garden, which grows food for both the farmer's market and the local food bank.
new building on site with existing buildings - LEED boundary?
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Courtney Royal on
Our project is a new construction building and will be constructed on a site that already has 2 other structures.
Single tenant O&M certification on a multitenant building
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Ricardo Sá on
LEED O&M 2009 reference guide stated (page xxii) that "certification applies only to whole buildings" and that "the project of a multitenant building must involve at least 90% of the total gros
Project Boundary
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Antje Holdefleiss on
Hello Everyone I have the following questions regarding the LEED Project boundary: · Are the project boundary only referring to the ground floor?
BD+C New Construction - New Stadium
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Quentin Jackson on
Hi all, I'm preparing to register a new project (new stadium) and would like to double check that it is a 'single building'.
LEED NC for Most of a Building
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Nathan Gauthier on
Does anybody have any thoughts on certifying an existing building undergoing a major renovation as LEED NC but excluding a relatively small portion of support space that is managed by a different e
Single certificate or multiple certificates?
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Ricardo Sá on
I am currently involved in the rehabilitation project of a set of school buildings located on the same grounds.
"Box" within an exisiting Warehouse
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Gina Dederer on
Our particular project consists of a 400sqm 1 floor "Box" (walls and roof) to be built in its entirety inside a much larger existing warehouse, which itself is part of a large industrial complex (b