Hello everyone!

I have some concrete cutsheets where it is specified that 30% of the water used fot it´s mixing was recycled. 

I am looking at a spreadsheet with the total construction cost for the project.  I already shaved off HVAC, Electrical, Plumbing, and other equipment costs from the total (including audiovisua

This is a bit bothersome.  I received 2 submittals where the postconsumer and/or preconsumer range where added as percentage range like "11% to 18%" rather than a fixed percentage value.&

LEED default materials cost is 45% of total construction costs (based on specific Master Format divisions).

I've been searching through the reference guide but I cannot find a direct answer.  My question is, can we also catalog paints and coatings into the Materials and Resources Calculator?&nb

I've been searching through the reference guide but I cannot find a direct answer.  My question is, can we also catalog paints and coatings into the Materials and Resources Calculator?&nb

Should the excavation work cost be included in the total contruction cost (while using the default cost of materials equal to 45% of total construction costs)?

Hi - a masonry subcontractor provided me with the total cost of the CMU block, however, he broke out the recycled content of each component of the CMU, i.e., he gave me the % of cement, fly ash, re

Hello, I have a question about construction costs to calculate the recycled content value of my LEED project.

Looking to confirm: We are using subgrade Fill for our building project that was procured from an on-site location.