Log in
Forum » Asia – South and Southeast
Topic

IEQ PreReq- Carbon monoxide monitoring

NC-v4 EQp1: Minimum indoor air quality performance
posted by Kim C on Oct 11, 2018, 1:59 am

The pre-requisite criteria speaks of having Carbon monoxide monitors installed in each dwelling unit. 

However, it is not common for dwelling units in Malaysia/Singapore to have such...

Last reply: Alokmay Behera, Apr 16, 2025, 5:25 am

Can building in operation for 1 year but only 50% occupancy apply LEED EB?

EBOM-v4.1 MPR3: Must comply with project size requirements
posted by Hieu Huynh on Mar 6, 2025, 2:57 am

My project is an office building for lease and has already been in operation for 1 year but only 50% of the tenant office area is fit out. Is it still eligible to apply for LEED...

Regd. heating system to be selected in baseline energy model as per ASHRAE 90.1 2013

NC-v4 EAp2: Minimum Energy Performance
posted by Anurag Ghosh on Jan 25, 2025, 12:28 am

Anurag Ghosh LEEDuser Basic Member January 27, 2025- 9:57 am Anyone on the above query? Log in or register to post comments Tyler Thumma 7Group LEEDuser Expert 67 thumbs up February 21, 2025- 11:01 am 1. This issue would require troubleshooting of the modeling inputs which it outside the scope of this forum. I recommend contacting the software support team if you are unable to resolve this. 2. The Baseline system is determined using Table G3.1.1-3 based on building type/size and climate zone, with additional modifications for dehumidification as outlined by Section G3.1.3.18.  Log in or register...

Last reply: Tyler Thumma, Feb 21, 2025, 11:01 am

Regd. monsoon reheat coils used in terminal boxes in a hospital project for dehumidification & defrosting

NC-v4.1 EAp2: Minimum Energy Performance
posted by Anurag Ghosh on Feb 5, 2025, 7:31 am

Hi, we have a hospital project following ASHRAE 90.1 2013 and having cooling as the predominant system. There is monsoon reheat using 2 electric hot water generators connected to the reheat coils...

Regd. Fresh Air Qty for energy modelling

NC-v4 EAp2: Minimum Energy Performance
posted by Anurag Ghosh on Jan 8, 2025, 3:41 am

Hi,

We are performing energy modelling for an airport. We have the Heat Load Summary Sheet where the Minimum Outdoor Air Requirement is taken with 30% excess to ASHRAE 62.1...

Regarding ASHRAE 90.1 2013 Fan Power Calculator_Excel Sheet

NC-v4 EAp2: Minimum Energy Performance
posted by Anurag Ghosh on Dec 13, 2024, 2:52 am

Hello Everyone,

Can anyone share me the ASHRAE 90.1 2013 Fan Power Calculator excel sheet for baseline model. I am unable to find it anywhere.

Thanks in Advance

Last reply: Marcus Sheffer, Dec 13, 2024, 10:52 am

VOC content evaluation document

Data-Centers-NC-v4.1 EQc2: Low-emitting materials
posted by Anna Okviana on Nov 26, 2024, 2:36 am

My project have floor hardener product, that comply with voc emission evaluation using GREENGUARD certificate, but the product can't provide document to comply with voc content evaluation because...

Non-Air-condition Warehouse

LEED v4.1 Discussion Forum
posted by Sonny Calma on Nov 24, 2024, 9:44 am

Could you please clarify whether non-air-conditioned warehouses are eligible for LEED certification? Thank you.

Requirement of Measurement for a new ventilation system

EBOM-v4 EQp1: Minimum indoor air quality performance
posted by Krithikha Muthukrishnan on Nov 22, 2024, 3:27 am

We are working on an existing factory project. It is mechnically ventilated in most spaces and those have been measured. However, the office spaces were conditioned through untiary ACs without...

Last reply: Dave Hubka, Nov 22, 2024, 6:57 am

Reduced parking footprint attempted for Campus

NC-v4 LTc7: Reduced parking footprint
posted by Pham Kim Ngan on Nov 20, 2024, 4:28 am

Hi everyone, 

We have decided to classify our project as a campus project. The new building is part of Phase 2 of our development and will be constructed on land that has already been...