Forum

Topic	Replies	Recent
Concrete Curing Systems NC-2009 IEQc4.1: Low-emitting materials - adhesives and sealants posted by Tim Rogers* on Aug 24, 2010, 11:19 am* We have an issue where a concrete curing application is being used on the concrete BEFORE the weatherproofing system is in place, and before the building is closed-in. As a wet product, the VOCs... Last reply: Mara Baum, Aug 24, 2010, 11:52 am	1	Mara Baum LEEDuser Premium Member Partner, Architecture & Sustainability DIALOG Tue Aug 24, 2010, 11:52 am
Classifying Products NC-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Adolfo Silva* on Feb 24, 2010, 10:03 am* Hello, I'm working on a project and the... Last reply: Mara Baum, Aug 23, 2010, 2:47 pm	7	Mara Baum LEEDuser Premium Member Partner, Architecture & Sustainability DIALOG Mon Aug 23, 2010, 2:47 pm
Perplexing Reference Guide language for Table 1, SCAQMD Rule 111 NC-2009 IEQc4.2: Low-emitting materials - paints and coatings posted by Mara Baum* on Feb 8, 2010, 4:47 pm* 2004. Please look into registering for LEEDUser (LEEDUser.com) where there are dicsussion forums that address inquiries such as yours."--Funny, I end up posting the answer to this question... Last reply: Mara Baum, Aug 23, 2010, 12:47 pm	4	Mara Baum LEEDuser Premium Member Partner, Architecture & Sustainability DIALOG Mon Aug 23, 2010, 12:47 pm
Re: Recycling System General forums posted by David Posada* on Aug 19, 2010, 7:03 pm* I don't think this method has a good chance of being accepted. I'm guessing the reviewers would say it relies too much on the users to correctly bag and label the different items, and is too... Last reply: David Posada, Aug 23, 2010, 11:56 am	4	David Posada LEEDuser Expert Integrated Design & LEED Specialist SERA Architects Mon Aug 23, 2010, 11:56 am
Supporting documentation for IEQ P1 NC-2009 IEQp1: Minimum indoor air quality performance posted by Bob Richardson* on Aug 12, 2010, 8:03 am* I'm working on a system with heat pumps and... Last reply: Roger Chang, Aug 23, 2010, 9:20 am	3	Roger Chang LEEDuser Expert Principal, Energy and Engineering Leader DLR Group \| Westlake Reed Leskosky Mon Aug 23, 2010, 9:20 am
Lighting requirements of Ashrae 90.1-2007 CI-2009 EAp2: Minimum Energy Performance posted by Gahl Sorkin Spanier* on Aug 20, 2010, 12:22 pm* Achieving the minimum Ashrea 90.1-2007 requirement for lighting power... Last reply: John Bauer, Aug 22, 2010, 12:15 am	2	John Bauer LEEDuser Basic Member Sun Aug 22, 2010, 12:15 am
Underground Parking EBOM-2009 SSc7.1: Heat island effect - nonroof posted by Drew Wenzel* on Aug 2, 2010, 4:50 pm* I'm working on a project where about 75% of our parking is located under the building itself. The LEED manual says there is "no... Last reply: Jacob Arlein, Aug 20, 2010, 5:57 pm	3	Jacob Arlein LEEDuser Basic Member Director of Energy Services Environmental Building Strategies Fri Aug 20, 2010, 5:57 pm
Re-calibration & corrective action NC-2009 EAc5: Measurement and Verification posted by Jenny Stadelmann* on Aug 20, 2010, 2:27 pm* Does the re-calibration of the as-built design energy model and the baseline model need to be done monthly during the 12 mos. M&V period, and then corrective action taken monthly based on how... Last reply: Marcus Sheffer, Aug 20, 2010, 3:15 pm	1	Marcus Sheffer LEEDuser Expert LEED Fellow 7group / Energy Opportunities Fri Aug 20, 2010, 3:15 pm
restaurant equipment CS-2009 EAp2: Minimum Energy Performance posted by Diana Wellenbrink* on Aug 18, 2010, 11:14 pm* Should future restaurant equipment be enluded in the calcs? Last reply: Marcus Sheffer, Aug 20, 2010, 3:08 pm	2	Marcus Sheffer LEEDuser Expert LEED Fellow 7group / Energy Opportunities Fri Aug 20, 2010, 3:08 pm
open space requirement NC-2009 SSc5.2: Site development - maximize open space posted by Matthew VanSweden* on Aug 19, 2010, 11:50 am* in a... Last reply: David Posada, Aug 20, 2010, 2:25 pm	3	David Posada LEEDuser Expert Integrated Design & LEED Specialist SERA Architects Fri Aug 20, 2010, 2:25 pm