Dear LEED Experts, 

In v4.1 is possible to combine "Option 2 AND Option 3" together or is just limited to "Option 1 AND/OR Option 2     OR   ...

The project is a production building with a connected warehouse and small office building , the parking located within the LEED project boundary is inclusive of bus parking used for building...

Dear LEED Experts, 

I woud like to use Option 3 and Option 2 to achieve the maximum number of point and even an Exemplary level point. 

It is possible to combine "Option 2 and...

On our site, seawater has been used for flushing instead of potable water, does it count as water-saving under LEED CI?

Or, only the savings from the water-efficient fixtures are counted...

For the CDPH Standard Method v1.2-2017 evaluation In V4 you had to specify the TVOC ranges: 0.5 mg/m3 or less, between 0.5 and 5 mg/m3, or 5 mg/m3 or more. In V4.1 it says, "The statement of...

Hello to all Users,

I have following question:

The run off Volume calculation method : V=P*Rv*A/12 as given in the reference guide does it refer to Run off volume per month...

In looking at the new 4.1, where can I look to determine if a products meets either the Action plan, the Advanced screening & assessment, or the Full assessment?

Additionally, if the...

Hello,

We are working on a residential project with a central laundry room with a 2200 cfm exhaust rate (each dryer has a dedicated exhaust fan). Per ASHRAE 62.1-2010, this space requires...

We have a LEED v4.1 Core & Shell project with no Landscaping in the scope of work. The existing landscaping is anticipated to remain with...

Dear All,

Has anyone experience on whether having air speed sensors in both the supply and return ducting of a recirculating variable air speed...