We are working on a small clinic, and were considering pursuing EQc2, Acoustic Environment from LEED HC as an innovation credit.

We found that the project will be required to achieve an...

I am please to see the draft LEED reference the EPA WaterSense fixture specification, but I have concern -- the current use of WaterSense for urinals and commercial (flushvalve) toilets, does not...

Straight from the 2009 rating system approved Nov 2008 - downloaded from the website on 11-14-09. It reads:

EQ Pr 3
"Design classrooms and other core learning spaces to include...

We are using 2009 for Retail, New Construction, and are being asked for number of parking spaces for employees and number of spaces for customers. We never separate them out like that, and I can...

Hello,

I have some questions regarding Option D - Calibrated Simulation:

1) Can we use the ASHRAE 90.1-2007 baseline used in EA cr 1 -Option1 as the M&V baseline ?
2) I...

For our LEED-CS project, there is no central HVAC system within the buidling. The tenant of the retail area will have to install their own equipment such as split-type A/C, fresh air fan, kitchen...

I'm working on a 100+ unit multifamily apartment project in San Jose. The site is in an area well served by transit overall (relatively central San Jose). However, there is only one bus stop...

In pursuing Option 1, Simulation, you are required to run two simulations on September 21st at 9am and 3pm. What I am wondering is how I calculate the compliant space based on these two...

I'm working on a LEED-S 2007 project that is pursuing this credit but I have a question about the requirements. The 2007 rating system requirement says "Also design classrooms and other core...

This might not be the most appropriate credit category to ask this question but it does affect the calculations for this credit. Our project has 21 full time telecommuters. To account for this I...