My project has designed UVC emitter in HVAC equipment. The design team believe this devices help reduce the space demand on outdoor air, and thus the project is planning to design the outdoor...

I'm working on the new factory construction project which is pursuing to achieve LEED CI.
Our new factory building will be constructed by government (only for...

We always have requests like that from our clients. How we interpret this I would say its like a framework or a roadmap - showing targets, points (current, target, achieved), green costs,...

I will be working to make every building on a federal campus be LEED certified. To do this, we are using NC, CS, CI, and EB depending on the best application for the building. I'd like to...

Our project is repurposing a portion of an academic building...

Hi,

LEED rates fitting's flow rate at 4.2 bar (60-80psi) for both baseline and design case, however our actual pressure on site is lower, do anyone know how whether we can claim our...

I've read in the ID catalog that post occupancy evaluations are supported for Innovation credits, but in 2007 Schools, the IEQc7.2 credit for Thermal Comfort: Verification seems to duplicate this...

I get to know that we need to upload brochure or...

I understand that occupancy calculations are to be consistent between all credits. For PIf3 Space Usage calculations, we used the default occupancies given by LEED in Appendix 2009. We...

As I describe in the 2009 CI EAc3 M&V thread on this forum (see response to Julian Bott's inquiry), the CI EAc3 language has a number of problems. To reiterate: Rather than reusing/rehashing the NC 2.0/2.1 language Case 2 should have adapted the 2009 BD&C EAc5 language (also used for NC 2.2). It cites IPMVP Vol. III with specific guidance for the available options (Option C makes little sense for CI) and dispenses with the arguably flawed "old" list of prescriptive requirements. Instead, Vol. III inherently provides the necessary flexibility and discretion to deal...