I'm working on a project currently that requires exterior security cameras. During a review process it came up that our current Light Pollution compliant exterior lighting design might not...

Does anybody know how to document Option 4, combination approach for v. 3.0? Using the prescription method, smaller rooms do not meet the requirement due to too much daylight, however it does...

Robert, we have a good thread going on rating system selection questions. Can you post your question there?

thumbs up January 13, 2011- 10:46 am Maura, if it's in your LEED boundary (which you and David discussed on the MPR forum), and it's hardscape, I'm not sure of what argument you would use...

Based on Advanced Energy Modeling For LEED Technical Manual 1.0, Table 2. it suggested Baseline of Data Center building should not be based on ASHRAE 90.1 - 2007.
How should I set my...

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up January 9, 2011- 11:24 pm Aliesa, if this is a Schools project would you mind posting your question under that SSc4.3 forum? Thanks! Log in or register to post comments Aliesa Adelman Sustainability Program Manager Wendel LEEDuser Basic Member 45 thumbs up January 12, 2011- 9:37 am This is not a schools project, it is the construction of a DOT facility. There is quite a bit of gray area in NC rating system when it comes to transportation centers such as this and inter/multi-modal facilities. Log...

I'm working through my first 2009 daylighting calculations using the Prescriptive Method. It seems that in 2.2 we used net square feet of the rooms. Now the 2009 template and Supplemental...

To attend the requirements of this PC it is necessary to compare the chosen equipment for the project with its similars. We are a little confused about what to compare: in the beginning the...

Does anyone already submitted any information for this PC?
We are thinking about a spreadsheet just like EAc1.4 from LEED ID&C informing all equipments applied to the project, its rated...

We used a previously PE signed SEP. Does the 24 month period for performance start at the SEP Generated date, the SEP date or 12 months prior to one of those dates? Here are the dates; SEP...