Forum discussion
CS-2009 EAp2: Minimum Energy Performance
Based on Advanced Energy Modeling For LEED Technical Manual 1.0, Table 2. it suggested Baseline of Data Center building should not be based on ASHRAE 90.1 - 2007.
How should I set my baseline for Data Center?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
A portion of our building envelope is historic. Can we exclude it from our model?
For an existing building, do I need to rotate the model?
Our process load is higher than 25%. Do we have to justify that?
Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?
Can mezzanines open to floors below be excluded from the energy model?
How do I provide a zip code for an international location?
For a project outside the U.S., how do I determine the climate zone?
For a project outside the U.S., how do I determine the Target Finder score?
Do hotel rooms need automatic light shut-off control?
How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?
The Section 9 space-by-space method does not include residential space types. What should I use?
Can the Passive House Planning Package (PHPP) be used to energy model for LEED?
Which baseline HVAC system do I use if my building has no heating or air conditioning?
Our project has a diesel backup generator. Should we include it in our energy model?
Can SHGC be higher in the proposed than in the baseline model?
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5906 thumbs up
January 13, 2011 - 9:07 am
The CIR you are referring to deals with process energy only (i.e. the IT load) no the building. 90.1 is used as the baseline for data centers. If you wish to claim process energy savings I would look over what has been proposed for the next version of LEED which is accessable right now during the public comment period which closes tomorrow.