Forum

Topic	Replies	Recent
Feed in tarriffs and EAc2 Schools-2009 EAc2: On-Site Renewable Energy posted by Ward Miller* on Jan 14, 2011, 12:46 am* In LEED energy savings seem to be calculated not only as an energy unit amount, but also and more specifically in EAc1 and 2 in monetary amounts. As solar PV panels would contribute to savings in... Last reply: Shillpa Singh, Jan 24, 2011, 11:14 am	1	Shillpa Singh LEEDuser Basic Member Senior Sustainability Manager YR&G Mon Jan 24, 2011, 11:14 am
PV Production Calculation for EAC1 NC-2009 EAc2: On-Site Renewable Energy posted by Omer Moltay* on Jan 10, 2011, 4:39 pm* Dear All, With a PV system on the roof of the building, we have calculated the predicted annual renewable electricity generation with some PV calculation software like PVSOL or software... Last reply: Shillpa Singh, Jan 24, 2011, 11:13 am	1	Shillpa Singh LEEDuser Basic Member Senior Sustainability Manager YR&G Mon Jan 24, 2011, 11:13 am
LEED Pilot Credits Pilot-Credits WEpc10: Sustainable wastewater management posted by Karen Poff* on Dec 20, 2010, 12:36 pm* Hi LEEDusers - Thanks for logging in. Relying on your experience and input, we are hoping to test the Sustainable Wastewater Management pilot credit and identify ways of improving it.... Last reply: Christina Macken, Jan 24, 2011, 9:13 am	3	Christina Macken LEEDuser Premium Member Assistant Project Manager, LEED v4 U.S. Green Building Council Mon Jan 24, 2011, 9:13 am
Transportation Management Plan NC-2009 IDc1: Innovation in Design posted by Linda Davisson* on Jan 18, 2011, 5:26 pm* Is there official guidance on the components that are required to achieve an ID credit for TDM Plan other than the ID catalogue published in March 08 and / or the CIRs related to TDM? I am... Last reply: Larry Jones, Jan 22, 2011, 5:38 pm	2	Larry Jones LEEDuser Basic Member Associate Director Atelier Ten Sat Jan 22, 2011, 5:38 pm
Natural Gas Use EBOM-2009 EAc1: Optimize Energy Efficiency Performance posted by Alexa Stone* on Dec 13, 2010, 12:18 pm* We are certifying a building in a campus. The campus as two commercial kitchens, one being in the building we are certifying. Typically, only the kitchen in the project building is used for all... Last reply: Dan Ackerstein, Jan 21, 2011, 5:58 pm	3	Dan Ackerstein LEEDuser Expert Principal Ackerstein Sustainability, LLC Fri Jan 21, 2011, 5:58 pm
Which point in time do I take for ascerting imperviousness? NC-2009 SSc6.1: Stormwater design - quantity control posted by Christian Brücher* on Dec 17, 2010, 5:05 am* Hello, following "problem": we have a project which will be built on a site which was an abandoned industrial site up to 2009. Then all buildings and surfaces were demolished and the site... Last reply: Tristan Roberts, Jan 21, 2011, 4:47 pm	1	Tristan Roberts LEEDuser Expert Representative Vermont House of Representatives Fri Jan 21, 2011, 4:47 pm
Campus services and LEED project boundary General forums posted by Alexia Anastassiadis* on Jan 21, 2011, 3:17 pm* We are working on a new building in an existing industrial campus. The company produces it's own electricity and potable water, but the building will have a boundary that is not the same as the... Last reply: Tristan Roberts, Jan 21, 2011, 4:30 pm	1	Tristan Roberts LEEDuser Expert Representative Vermont House of Representatives Fri Jan 21, 2011, 4:30 pm
LEED Online agreement General forums posted by Tristan Roberts* on Jan 21, 2011, 3:07 pm* John, you mean the LEED Online agreement. I just wrote an... Last reply: John Ida, Jan 21, 2011, 4:24 pm	1	John Ida LEEDuser Basic Member President Urban Works, Inc. Fri Jan 21, 2011, 4:24 pm
Acceptable documentation for LEED for Schools, 2007 Schools-2009 IEQc4.6: Low-Emitting Materials—Ceiling and Wall Systems posted by Alison Y Rivenburgh* on Jan 21, 2011, 11:54 am* For a LEED for Schools, 2007 project we have provided for the LEED construction documentation reviewers a list of ceiling and wall system components used on the project with the coordinating... Last reply: Josh Jacobs, Jan 21, 2011, 4:22 pm	5	Josh Jacobs LEEDuser Basic Member Technical Information & Public Affairs Manager UL Environment Fri Jan 21, 2011, 4:22 pm
Flat Primer VOC Schools-2009 IEQc4.2: Low-Emitting Materials—Paints and Coatings posted by Denise Shimabukuro* on Dec 6, 2010, 4:40 pm* GS-11 allow primers to have a... Last reply: Josh Jacobs, Jan 21, 2011, 4:21 pm	1	Josh Jacobs LEEDuser Basic Member Technical Information & Public Affairs Manager UL Environment Fri Jan 21, 2011, 4:21 pm