hii, we are doing LEED-CI project, and we have installed submeters like BTU meter, kwh meters and also implementing EA Credit 30. Measurement and Verification. Also above of this we have BMS...

When modeling a building under the Core and Shell system, do I have to compare the energy performance only between systems under the project scope, i.e. Core and Shell? Or do I have to compare...

Has anyone performed an exceptional alculation to demonstrate energy savings in a drug manufacturing facility for EAc1? We are trying to demonstrate an improvement and savings by lowering the...

Hi everyone, please note that we here at USGBC are going to be discussing the revisions to the Daylight section in our upcoming webinar:
...

under review, definitely will keep you and the forum up to date on the result. If there is still clarity that needs to be resolved I may call Heschong-Mahone... Log in or register to post comments Tristan...

I am doing an interior renovation of a barracks building with only minimal exterior work. I will be adding some sidewalks and a small mechanical building. The site is now approximately 65% open...

Is it possible to achieve this credit by choosing the first option (preferred parking) and using an automatic parking system. This system is designed for 24 cars therefore I need to offer 2...

In the section 8.4 Feeder conductors shall be sized for a maximum voltage drop of 2% at design loadand branch circuit condutors shall be sized for a maximum voltage drop of 3% at design load....

My colleague at Environmental Building News, Nadav Malin, just posted a great article about this pilot credit:...

The LEED boundary for our project does not include the parking lot near the building. The form indicates that we must "upload a photometric site plan of the parking areas with a footcandle...