Forum

Topic	Replies	Recent
HangarGrip Adhesive NC-2009 IEQc4.1: Low-emitting materials - adhesives and sealants posted by Elizabeth Powers* on Jul 11, 2011, 5:13 pm* The product in question is the Eco Hanger Grip Adhesive from MEI, described as "a construction-type paste adhesive specially designed for bonding insulation hangers to metal ducts and unfinished... Last reply: David Posada, Jul 18, 2011, 1:23 pm	1	David Posada LEEDuser Expert Integrated Design & LEED Specialist SERA Architects Mon Jul 18, 2011, 1:23 pm
What about embedded Adhesives NC-2009 IEQc4.1: Low-emitting materials - adhesives and sealants posted by Maya Karkour* on Jul 18, 2011, 10:48 am* Hello, Assuming the building is purchasing pre-made... Last reply: David Posada, Jul 18, 2011, 12:53 pm	1	David Posada LEEDuser Expert Integrated Design & LEED Specialist SERA Architects Mon Jul 18, 2011, 12:53 pm
ACP Pilot-Credits PC1: Life-Cycle Assessment (LCA) of Building Assemblies and Materials posted by Whit Faulconer* on Jul 18, 2011, 10:34 am* Thanks Batya, and Susan hit the nail on the head. Proposing that at some point an LCA based credit could be an ACP for some of the MR Credits is tricky for many reasons. We are working to...	0
Who may purchase RECs? Schools-2009 EAc6: Green Power posted by James Keohane* on Jul 17, 2011, 12:52 pm* Is acceptable for a member of the design team or construction team to purchase RECs? May a project team purchase RECs using project contingency funds directed by Owner? Last reply: Marcus Sheffer, Jul 18, 2011, 8:21 am	1	Marcus Sheffer LEEDuser Expert LEED Fellow 7group / Energy Opportunities Mon Jul 18, 2011, 8:21 am
CI Project in two buildings General forums posted by Steve Khouw* on Jul 15, 2011, 12:06 am* Need guidance, not sure whether we have to register as 1 project or 2 here. We have a project whereby the tenancy space involves 1 building of 8 floors and the adjacent building of 3 floors. It... Last reply: Steve Khouw, Jul 17, 2011, 10:36 am	2	Steve Khouw LEEDuser Basic Member Principal DNA GreenDesign Sun Jul 17, 2011, 10:36 am
Daylighting Calculations Out Of Range NC-2009 IEQc8.1: Daylight and views - daylight posted by Eesmyal Santos-Brault* on Jul 14, 2011, 7:25 pm* We are working on a mixed use commercial and residential building using OPTION 2: Prescriptive Path where we calculated 0.150 Last reply: Eddy Santosa, Jul 15, 2011, 6:28 pm	1	Eddy Santosa LEEDuser Basic Member Director of Sustainability DBR Engineering Consultants Fri Jul 15, 2011, 6:28 pm
Prescriptive Method: Skylights NC-2009 IEQc8.1: Daylight and views - daylight posted by Kash Boodjeh* on Jun 15, 2011, 12:17 pm* Hello, We are pursuing the Prescriptive Method for this credit, using skylights. I am not sure how to answer the first two measurements requested on the LEED form (the distance between... Last reply: Eddy Santosa, Jul 15, 2011, 6:24 pm	5	Eddy Santosa LEEDuser Basic Member Director of Sustainability DBR Engineering Consultants Fri Jul 15, 2011, 6:24 pm
a mistake in the daylight formula of the available spreadsheet NC-2009 IEQc8.1: Daylight and views - daylight posted by Eddy Santosa* on May 24, 2011, 8:03 pm* Please be careful and aware when you use the available spreadsheet: Daylight and Views Calculator released 11152010.xls . The spreadsheet contains a mistake in its skylight roof coverage... Last reply: Eddy Santosa, Jul 15, 2011, 6:22 pm	2	Eddy Santosa LEEDuser Basic Member Director of Sustainability DBR Engineering Consultants Fri Jul 15, 2011, 6:22 pm
Stormwater Management EBOM-2009 SSc6: Stormwater Quantity Control posted by Randy Walsh* on Jul 15, 2011, 4:54 pm* Does installation of mechanical filter media into the storm drain help meet this requirement? (Flogard curb filter inlet) Last reply: David Posada, Jul 15, 2011, 5:17 pm	1	David Posada LEEDuser Expert Integrated Design & LEED Specialist SERA Architects Fri Jul 15, 2011, 5:17 pm
Negative Pressure Differential Requirement CS-2009 IEQc5: Indoor Chemical and Pollutant Source Control posted by Maya Karkour* on Jun 21, 2011, 3:31 am* Dear all, One of the credit requirements is that: "The pressure differential with the surrounding spaces must be at least 5 Pa on average and 1 Pa at a minimum when the doors... Last reply: Allison Beer McKenzie, Jul 15, 2011, 5:05 pm	1	Allison Beer McKenzie LEEDuser Expert Architect, Director of Sustainability SHP Leading Design Fri Jul 15, 2011, 5:05 pm