Dear all,

The project has 2/4 LPF WC fixtures specified, and the water calculations done accordingly.
The Contractor is suggesting a WC fixture with a maximum flush rate of 3/6 LPF,...

We are working on a project where the owner/architect has elected to satisfy the requirements of this credit with overhead diffusers controlled by remote controls placed in individual workstation...

I had a civil engineer try to approve SSp1, Construction Activity Pollution Prevention using his LPE. He went to the credit's LPE page and clicked the box and nothing happened. Neither the form...

We're an Applied Tech School that teaches CAD and complex simulation technologies. We submitted an alternative compliance path, showing that, although 90% of our office equipment is Energy Star...

I am working with the latest version of PI Form 2 on a project and it includes several new lines to complete. One that we are struggling with ask for the "square footage of all parking areas."...

what's the difference between "Gross square footage undergoing initial fit-out" vs "Gross square footage undergoing alteration"? I can not find these terms in the Reference Guide, nor on...

I have not been able to find out much info on perf periods, so I have a few questions. If I have missed an area that provides good general info, please point me in the right direction:

-...

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11470 thumbs up February 17, 2012- 12:09 pm Camelot, it sounds like a single certification to me. See the heading "Project boundaries that include other buildings" in the MPR supplemental guidance. For the other question, I think that is best addressed on our EAp2 forum-- please post there. Log in or register to post comments ...

Dear all,

Do any of you know if we are supposed to submit all the appeals at once ? or can we submit them gradually ?

Thank you for your help,

Regarding...