Credit achievement rate
XX%
Upgrade to LEEDuser Premium to see how many projects achieved this credit. Try it free »
LEEDuser’s viewpoint
Frank advice from LEED experts
LEED is changing all the time, and every project is unique. Even seasoned professionals can miss a critical detail and lose a credit or even a prerequisite at the last minute. Our expert advice guides our LEEDuser Premium members and saves you valuable time.
Credit language
![USGBC logo](/sites/all/themes/leeduser/images/usgbc_170.png)
© Copyright U.S. Green Building Council, Inc. All rights reserved.
Requirements
Employ strategies that in aggregate use 20% less water than the water use baseline calculated for the building (not including irrigation).
Calculate the baseline according to the commercial and/or residential baselines outlined below1. Calculations are based on estimated occupant usage and must include only the following fixtures and fixture fittings (as applicable to the project scope): water closets, urinals, lavatory faucets, showers, kitchen sink faucets and pre-rinse spray valves. [Europe ACP: Water Use Baseline]
Commercial Fixtures, Fittings, and Appliances | Current Baseline (Imperial Units) | Current Baseline (Metric units) |
---|---|---|
Commercial Toilets | 1.6 gallons per flush (gpf)* Except blow-out fixtures: 3.5 (gpf) |
6 liters per flush (lpf) Except blow-out fixtures: 13 lpf |
Commercial Urinals | 1.0 (gpf) | 4 lpf |
Commercial Lavatory (Restroom) Faucets | 2.2 gallons per minute (gpm) at 60 pounds per square inch (psi), private applications only (hotel or motel guest rooms, hospital patient rooms) 0.5 (gpm) at 60 (psi)** all others except private applications 0.25 gallons per cycle for metering faucets |
8.5 liters per minute (lpm) at 4 bar (58 psi), private applications only (hotel or motel guest rooms, hospital patient rooms) 2.0 lpm at 4 bar (58 psi), all others except private applications 1 liter per cycle for metering faucets |
Showerheads | 2.5 (gpm) at 80 (psi) per shower stall **** | 9.5 lpm at 5 bar (58 psi) |
For projects with commercial pre-rinse spray valves, the flow rate must comply with the asME a112.18.1 standard of 1.6 gpm or less. |
Residential fixtures, fittings, and appliances | Current baseline (imperial units) | Current baseline (metric units) |
---|---|---|
Residential toilets | 1.6 (gpf)*** | 6 liters per flush (lpf) Except blow-out fixtures: 13 lpf |
Residential lavatory (bathroom) faucets | 2.2 (gpm) at 60 psi | 4 lpm 8.5 lpm at 4 bar (58 psi), private applications only (hotel or motel guest rooms, hospital patient rooms) 2.0 lpm at 4 bar (58 psi), all others except private applications 1 liter per cycle for metering faucets |
Residential kitchen faucet | ||
Residential showerheads | 2.5 (gpm) at 80 (psi) per shower stall**** | flow rate ≤ 6.1 lpm (no pressure specified; no performance requirement) |
* EPAct1992 standard for toilets applies to both commercial and residential models. ** in addition to Epact requirements, the american society of Mechanical Engineers standard for public lavatory faucets is 0.5 gpm at 60 psi (2.0 lpm at 4 bar (58 psi)) (asME a112.18.1-2005). this maximum has been incorporated into the national uniform plumbing Code and the international plumbing Code. *** EPAct 1992 standard for toilets applies to both commercial and residential models. **** residential shower compartment (stall) in dwelling units: the total allowable flow rate from all flowing showerheads at any given time, including rain systems, waterfalls, bodysprays, bodyspas and jets, must be limited to the allowable showerhead flow rate as specified above (2.5 gpm) per shower compartment, where the floor area of the shower compartment is less than 2,500 square inches (1.5 square meters). for each increment of 2,500 square inches (1.5 square meters) of floor area thereafter or part thereof, an additional showerhead with total allowable flow rate from all flowing devices equal to or less than the allowable flow rate as specified above must be allowed. Exception: showers that emit recirculated nonpotable water originating from within the shower compartment while operating are allowed to exceed the maximum as long as the total potable water flow does not exceed the flow rate as specified above. |
- Commercial Steam Cookers
- Commercial Dishwashers
- Automatic Commercial Ice Makers
- Commercial (family-sized) Clothes Washers
- Residential Clothes Washers
- Standard and Compact Residential Dishwashers
Alternative Compliance Paths (ACPs)
Europe ACP: Water Use Baseline
Projects in Europe may use the values defined by European Standards. [view:embed_resource=page_1=4887966] See all forum discussions about this credit »What does it cost?
Cost estimates for this credit
On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.
Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.
This information is also available in a full PDF download in The Cost of LEED v4 report.
Learn more about The Cost of LEED v4 »Frequently asked questions
Can you explain the 12-second duration for metering faucets?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Can I use a nonpotable water source to contribute to WEp1 compliance?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Our project does not have any eligible water fixtures in the project boundary. Can we comply with WEp1?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
We are having trouble finding EPAct-compliant fixtures. Is that a problem?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Where can I find a clear meaning of "public" and "private" as relevant to lavatory faucets?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Our project is a factory with historically a 95% male workforce. The restroom design accounts for this. Can I argue that the male/female gender ratio is different than 50/50?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Are shower duration controls an acceptable water-saving strategy?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Can I include process water savings in order to earn an Exemplary Performance point?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Will the reviewers accept a spreadsheet as a plumbing fixture schedule in lieu of the plans from the Construction Documents?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
In LEED review comments I've been referred to the Water Use Reduction Additional Guidance document. I didn't know this was a required reference document.The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Should I include bar sinks? What about mop sinks or janitor sinks? Swimming pools? Safety showers? Bidets? Tub spouts? The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
We provided new showers in our project to comply with the alternative transportation credit. Should they be considered in WEp1 calculations? The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Checklists
Step by step to LEED certification
LEEDuser’s checklists walk you through the key action steps you need to earn a credit, including how to avoid common pitfalls and save money.
Documentation toolkit
The motherlode of cheat sheets
LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.
Get the inside scoop
Our editors have written a detailed analysis of nearly every LEED credit, and LEEDuser premium members get full access. We’ll tell you whether the credit is easy to accomplish or better left alone, and we provide insider tips on how to document it successfully.
![USGBC logo](/sites/all/themes/leeduser/images/usgbc_170.png)
© Copyright U.S. Green Building Council, Inc. All rights reserved.
Requirements
Employ strategies that in aggregate use 20% less water than the water use baseline calculated for the building (not including irrigation).
Calculate the baseline according to the commercial and/or residential baselines outlined below1. Calculations are based on estimated occupant usage and must include only the following fixtures and fixture fittings (as applicable to the project scope): water closets, urinals, lavatory faucets, showers, kitchen sink faucets and pre-rinse spray valves. [Europe ACP: Water Use Baseline]
Commercial Fixtures, Fittings, and Appliances | Current Baseline (Imperial Units) | Current Baseline (Metric units) |
---|---|---|
Commercial Toilets | 1.6 gallons per flush (gpf)* Except blow-out fixtures: 3.5 (gpf) |
6 liters per flush (lpf) Except blow-out fixtures: 13 lpf |
Commercial Urinals | 1.0 (gpf) | 4 lpf |
Commercial Lavatory (Restroom) Faucets | 2.2 gallons per minute (gpm) at 60 pounds per square inch (psi), private applications only (hotel or motel guest rooms, hospital patient rooms) 0.5 (gpm) at 60 (psi)** all others except private applications 0.25 gallons per cycle for metering faucets |
8.5 liters per minute (lpm) at 4 bar (58 psi), private applications only (hotel or motel guest rooms, hospital patient rooms) 2.0 lpm at 4 bar (58 psi), all others except private applications 1 liter per cycle for metering faucets |
Showerheads | 2.5 (gpm) at 80 (psi) per shower stall **** | 9.5 lpm at 5 bar (58 psi) |
For projects with commercial pre-rinse spray valves, the flow rate must comply with the asME a112.18.1 standard of 1.6 gpm or less. |
Residential fixtures, fittings, and appliances | Current baseline (imperial units) | Current baseline (metric units) |
---|---|---|
Residential toilets | 1.6 (gpf)*** | 6 liters per flush (lpf) Except blow-out fixtures: 13 lpf |
Residential lavatory (bathroom) faucets | 2.2 (gpm) at 60 psi | 4 lpm 8.5 lpm at 4 bar (58 psi), private applications only (hotel or motel guest rooms, hospital patient rooms) 2.0 lpm at 4 bar (58 psi), all others except private applications 1 liter per cycle for metering faucets |
Residential kitchen faucet | ||
Residential showerheads | 2.5 (gpm) at 80 (psi) per shower stall**** | flow rate ≤ 6.1 lpm (no pressure specified; no performance requirement) |
* EPAct1992 standard for toilets applies to both commercial and residential models. ** in addition to Epact requirements, the american society of Mechanical Engineers standard for public lavatory faucets is 0.5 gpm at 60 psi (2.0 lpm at 4 bar (58 psi)) (asME a112.18.1-2005). this maximum has been incorporated into the national uniform plumbing Code and the international plumbing Code. *** EPAct 1992 standard for toilets applies to both commercial and residential models. **** residential shower compartment (stall) in dwelling units: the total allowable flow rate from all flowing showerheads at any given time, including rain systems, waterfalls, bodysprays, bodyspas and jets, must be limited to the allowable showerhead flow rate as specified above (2.5 gpm) per shower compartment, where the floor area of the shower compartment is less than 2,500 square inches (1.5 square meters). for each increment of 2,500 square inches (1.5 square meters) of floor area thereafter or part thereof, an additional showerhead with total allowable flow rate from all flowing devices equal to or less than the allowable flow rate as specified above must be allowed. Exception: showers that emit recirculated nonpotable water originating from within the shower compartment while operating are allowed to exceed the maximum as long as the total potable water flow does not exceed the flow rate as specified above. |
- Commercial Steam Cookers
- Commercial Dishwashers
- Automatic Commercial Ice Makers
- Commercial (family-sized) Clothes Washers
- Residential Clothes Washers
- Standard and Compact Residential Dishwashers
Alternative Compliance Paths (ACPs)
Europe ACP: Water Use Baseline
Projects in Europe may use the values defined by European Standards. [view:embed_resource=page_1=4887966]XX%
Upgrade to LEEDuser Premium to see how many projects achieved this credit. Try it free »
Got the gist of WEp1 but not sure how to actually achieve it? LEEDuser gives step-by-step help. Premium members get:
- Checklists covering all the key action steps you'll need to earn the credit.
- Hot tips to give you shortcuts and avoid pitfalls.
- Cost tips to assess what a credit will actually cost, and how to make it affordable.
- Ideas for going beyond LEED with best practices.
- All checklists organized by project phase.
- On-the-fly suggestions of useful items from the Documentation Toolkit and Credit Language.
In the end, LEED is all about documentation. LEEDuser’s Documentation Toolkit, for premium members only, saves you time and helps you avoid mistakes with:
- Calculators to help assess credit compliance.
- Tracking spreadsheets for materials purchases.
- Spreadsheets and forms to give to subs and other team members.
- Guidance documents on arcane LEED issues.
- Sample templates to help guide your narratives and LEED Online submissions.
- Examples of actual submissions from certified LEED projects.
Can you explain the 12-second duration for metering faucets?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Can I use a nonpotable water source to contribute to WEp1 compliance?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Our project does not have any eligible water fixtures in the project boundary. Can we comply with WEp1?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
We are having trouble finding EPAct-compliant fixtures. Is that a problem?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Where can I find a clear meaning of "public" and "private" as relevant to lavatory faucets?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Our project is a factory with historically a 95% male workforce. The restroom design accounts for this. Can I argue that the male/female gender ratio is different than 50/50?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Are shower duration controls an acceptable water-saving strategy?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Can I include process water savings in order to earn an Exemplary Performance point?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Will the reviewers accept a spreadsheet as a plumbing fixture schedule in lieu of the plans from the Construction Documents?The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
In LEED review comments I've been referred to the Water Use Reduction Additional Guidance document. I didn't know this was a required reference document.The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
Should I include bar sinks? What about mop sinks or janitor sinks? Swimming pools? Safety showers? Bidets? Tub spouts? The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |
We provided new showers in our project to comply with the alternative transportation credit. Should they be considered in WEp1 calculations? The answer to this question is available to LEEDuser premium members. Start a free trial » (If you're already a premium member, log in here.) |