Topic | Recent |
---|---|
Confused on what to fill in on the ASHRAE Buiding Envelope ComplCI-2009 EAp2: Minimum Energy Performanceposted by Sarah Johnson on May 21, 2010, 2:40 pm
We are doing a LEED CI upfit in an old existing building. The upload page for EAp2 requires that we upload ASHRAE Buiding Envelope Compliance form. The Envelope is not in the scope of the... Last reply: Paul Conrad, May 27, 2010, 8:47 am |
|
ASHRAE Compliance FormsCI-2009 EAp2: Minimum Energy Performanceposted by Jose Salinas on Apr 19, 2010, 9:49 am
Hi, my question is as follows: in version 2.2 when you chose to use the complience forms to support the mandatory provisions, only the check list part was necessary to be filled up. Since the V 3... Last reply: Paul Conrad, May 27, 2010, 8:45 am |
|
P1 for Germany, Switzerland, AustriaNC-2009 SSp1: Construction Activity Pollution Preventionposted by Tatjana Ernst on May 26, 2010, 8:59 am
Hi everyone, has anybody expercience with LEED Projects in Switzerland or Austria? What challenges did you find out regarding P1? We have two projects in Vienna and Zürich. In my opinion... Last reply: Jean Marais, May 27, 2010, 3:16 am |
|
What does this mean for current projects under review?General forumsposted by Seema Pandya on May 4, 2010, 3:57 pm
I am happy that consistency in LEED credit rulings and interpretations will come in the future. Is there any advice for projects that are currently going through the review process that find... Last reply: Tristan Roberts, May 26, 2010, 11:35 pm |
|
Split reviewGeneral forumsposted by Tristan Roberts on May 26, 2010, 10:58 pm
My understanding is that if you're doing a split design/construction review, if a credit is rejected at the Preliminary Construction Review, you can submit new information, perhaps even new... |
|
Thermal Comfort SurveyCI-2009 IEQc7.2: Thermal comfort - verificationposted by Simon Sue on May 20, 2010, 2:58 amTristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up May 26, 2010- 5:59 pm James, there's been some good discussion on this issue over on the forum for the NC version of this credit.It's our understanding that all occupants must be surveyed or at least have an opportunity to be included.Since the survey will most likely take place after your certification is awarded, you don't have to provide the results, only commit to doing the survey. Log in or register to post comments ... Last reply: Tristan Roberts, May 26, 2010, 5:59 pm |
|
Definition of Building OccupantsNC-2009 IEQc7.2: Thermal comfort - verificationposted by Lauren Sparandara on Feb 21, 2010, 1:16 pm
I am working on a large hospital project that is registered under LEED-NCv2.2. I am wondering how many building occupants need to be surveyed. Does this include just... Last reply: Steve Loppnow, May 26, 2010, 5:55 pm |
|
SSC8 Lamp Lumen CalculationSchools-2009 SSc8: Light Pollution Reductionposted by Scott Ennis on May 26, 2010, 1:47 pm
I am in process of performing a... |
|
Multiple building guidanceGeneral forumsposted by Tristan Roberts on May 26, 2010, 11:44 am
Chris, for a multiple building situation like this I think you'll need to contact... |
|
RP Credits Listed TwiceEBOM-2009 RPc1: Regional Priorityposted by Jordan Friedberg on May 22, 2010, 8:23 pm
For some zipcodes, the list of regional priority credits lists the same credit twice (eg SS6 in the EB system). I assume this means if I achieve the requirements, I get three times the credit (... Last reply: Tristan Roberts, May 25, 2010, 5:58 pm |