Hi everyone,

Should we consider the cooling tower makeup water as  process water demand?

Hi all,

Dear Everybody,

Dear everybody, 

I'm working on a project where we completed a very thorough IP analysis during concept design.

Hi,

Hi everyone,

Does anyone know if there is a time limit or a deadline from when a project is registered until certification is achieved?

Thank you in advance.

We are studying the feasibility of acheiving LEED certification for a series of floors in an office building.

I have a project that just completed the IP credit requirements before the end of SD, and now finds itself likely needing to relocate to a different site. The proposed new site is about 1

Hello,
My client wishes to have his project certified in LEED V4.

Ok.... So I'm working on my first LEED v4 BD+C project, and we're looking to pursue the IP credit.

Hey All,

To the USGBC staff who I know read these comments, please issue consistent guidance for how this credit will be evaluated. I've submitted twice for this credit.

Hi all,

We are pursuing a LEED for Schools project and are looking to get the Integrative process credit. Couple of clarifying questions -

USGBC references the Indoor and Outdoor Water Reduction Calculators; any recommendations about additional tools a team should utilize in completing their water-budget analysis?

Hi. I am studying for my LEED Green Associate exam based on LEED V4. Can someone tell me in which site I could get an example of OPR and BOD for rating system NC? Thanks.

I was wondering if anyone can shed some light on whether it would be acceptable to conduct a Design Charrette over the course of 4 days, as opposed to a 4 hour charrette in one day?

The part "Assess Thermal Comfort Ranges" is not very clear for me.

Hello,

Is there a document out there to assist in what should be written in construction documents tenders destined for the Construction and MEP companies ?

Thank you

Hi Marcus, So I'm confused. LEEDuser's preamble above indicates any project can get this credit, and you're not required to implement anything just analyze.

It doesn't seem like the credit requires evaluation of various HVAC systems (e.g. radiant heat vs forced air heat, packaged cooling vs split systems, etc.).

Hello, I'm working on a project in Kuwait and need to achieve the IPc1 credit for water consumption. I've been struggling to use the LEED-recommended ETo calculator tool, produced by the FAO, whi

Generally,in other categories, we have to perform to meet all prerequisites though we don't need any credits in the categories (suppose that we have enough credits that meet our goal.

Do you need to adopt all strategies that you demonstrate as facilitating best energy performance for this credit?

how do you define a simple box model? for example, do you need to model thermal zones, etc.

Our region primarily uses design build which means that there are two very separate Schematic Design processes for our projects.

Hi! We did some parameter studies in the early stage of the design process. Now i am wondering if we can use them for documentation of this credit.

Please, someone knows where can I buy the Integrative Process (IP) ANSI Consensus National Standard Guide© 2.0? In ANSI's webstore I found v1.0 only.

It appears that this credit can not be earned if a project does not meet some water demand through nonpotable sources.

Has anyone had success with (2) 2-hr sessions being accepted as compliant (by GBCI) for the integrated design team charrette?

Just want confirmation that there is no prereq for performing IP.